Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: overclocking my system




  1. #1
    Join Date
    Apr 2003
    Posts
    4

    Default

    i got some kingston hyper x pc3500 512mb, p4 2.4, and a radeon 9500 pro on a sinxp1394 mobo. my question is what would be a good setting to over clock my cpu and the memory. i got the cpu overclockig down to 2.6 but i need some help on my memory overclocking. how its works and what would be a good setting.



    :woot:

  2. #2
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    Ok I havn't worked with this chipset yet (which is why I havn't replied b4) but if ya raise both the CPU and memory voltages by 0.1v and then start taking the FSB up at small steps with stress testing between each change to check for stabilty and see how far ya can go then report back to us.

  3. #3
    Join Date
    Apr 2003
    Posts
    4

    Default

    how do i stress test ??? what program do i use to stress test ???:confused: :confused:

  4. #4
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    Running programs like SiSoft's Sandra burn in utility or 3DMark though I run SETI@home and 3DMark2001SE at the same time (but I'm very fussy).

  5. #5
    Join Date
    Apr 2003
    Posts
    4

    Default

    :thumb: roger that ...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •