Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 9 of 9

Thread: How much can you over clock a GeForce4Ti




  1. #1
    Join Date
    Apr 2003
    Posts
    9

    Default

    I'm running my 4400 at 300/600 right now, I have the Leadtek A250 the one with the huge heat sink and dual fans. 300/600 runs without a problem, I felt the heat sink and it isn't much hotter than the default clock speed, if any hotter at all. I wanted to know how much I should try and push it, without breaking anything. Thanks.

  2. #2
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    No 2 cards will o/c the same and the only way to find out how far your's will go is to keep going.

  3. #3
    Join Date
    Apr 2003
    Posts
    63

    Default

    [QUOTE]Originally posted by InfiniteThought
    [B]I'm running my 4400 at 300/600 right now, I have the Leadtek A250 the one with the huge heat sink and dual fans. 300/600 runs without a problem, I felt the heat sink and it isn't much hotter than the default clock speed, if any hotter at all. I wanted to know how much I should try and push it, without breaking anything. Thanks. Hi , Noob here but i have my Albatron ti 4600 set @ 339/709 .
    Vulcan chicks are hot .......... Cezch chicks are hot ............ my left palm is not

  4. #4
    Join Date
    Dec 2002
    Location
    Western face of Mt.St.Helens
    Posts
    3,060

    Default

    Just OC a small step at time while checking for stabillity,
    and don't worry about breaking anything, as the worst that can happen is that have to you open the case and physically short the Cmos jump pin to reset BIOS to default and start over again.....and you'll know ya reached that point when even after a reboot the screen stays black.........so have fun and pay attention to your settings by markin' down.................:D
    Happiness isn't something you experience; it's something you recall.

  5. #5

    Default

    i dunno..i had a PNY 4200 250core 500bus and i oc' it to 300/600
    and about 10 min later(while running 80 fps in ut2k3 with all settings at max and AA@2x and at@2x my screen went black and i couldnt load anythign in 3d anymore just windows and after reboot wouldnt even go into windows...g/l wiht urs and becarefull...btw sorta off topic..i saw the overclock in the drivers &settigns of the card but now that i got a warrenty replacement it wont oc with the new driver update...this only happen to me?? my buddy with same exact card cant oc his anymore eather

  6. #6
    Join Date
    Feb 2003
    Posts
    311

    Default

    Hey InfiniteThought i have the same card (A250TD) and i have gotten it to 320/625. After that it will start to mess up on 3D games ( Atleast MOHAA). But w/ 330/630 u can run 2D stuff. I have one tried to get the mem up to 640 and it would freeze up after a while
    <font color=orange>AMD Athlon XP 2500+ Barton (166*11=1883MHz) -|- Asus A7N8X Deluxe Rev2.0 -|- Corsair XMS PC3200 512 MB RAM 2T-3-3-6 @DDR333 -|- Leadtek A250 TD GF4 TI 4400 300/630 -|- 40 Gig Quntaum Fireball AP+ -|- 52x Samsung CD-ROM Drive -|- SB Live Digital 5.1 -|- Antec SG case w/350 Watt Power-Up PSU</font>

  7. #7
    Join Date
    Apr 2003
    Posts
    845

    Default

    how do you know when you've o/ced to much?
    The one thing man learns from history is that man does not learn from history.

  8. #8

    Default

    You'll get artifacts / screen freezing. That's how you'll know.
    <font size=1>Pentium 4 2.53GHz @ 3.515GHz (FSB: 185; VCore: 1.725)</font>
    <font size=1><a href="http://www.thermaltake.com/products/heatsink/v7plus.htm">ThermalTake Volcano 7+</a></font>
    <font size=1><a href="http://www.albatron.com.tw/product/PX845PEV_800.asp">Albatron PX845PEV-800</a></font>
    <font size=1>512MB Samsung DDR333 @ DDR370</font>
    <font size=1><a href="http://www.ati.com/products/pc/radeon9700pro/">Radeon 9700 Pro 128MB</a></font>
    <font size=1><a href="http://www.adaptec.com/worldwide/product/proddetail.html?prodkey=ASC-29160">Adaptec 29160 Ultra160 SCSI Controller</a></font>
    <font size=1><a href="http://www.seagate.com/cda/products/discsales/marketing/detail/0,1081,321,00.html">Seagate ST373405LW 73GB U160 SCSI</a></font>
    <font size=1>Enermax EG465P-VE 450watt PSU</font>
    <font size=1>CPU Temp (100%): 39 C; HDD Temp (100%): 31 C (100%); Chipset Temp (100%): 32 C</font>

  9. #9
    Join Date
    Apr 2003
    Posts
    845

    Default

    will your screen move, like side will be in one place and then suddenly go to another then back to the first like REALLY FAST?
    The one thing man learns from history is that man does not learn from history.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •