I was getting tired of looking at the ugly pre-fab fan cutout in my case.
<img src=http://studentwebs.winona.edu/pjtheler0193/pics/tweak/casebefore.jpg>
I used a dremmel with a cutting disk for the initial rough cut, then a very fine hand held file for the finishing touches.
<img src=http://studentwebs.winona.edu/pjtheler0193/pics/tweak/fanclose.jpg><br>
<img src=http://studentwebs.winona.edu/pjtheler0193/pics/tweak/fanfar.jpg>
The cutout for the fan is so precise, that the fan is tightly held in place by friction.
<img src=http://studentwebs.winona.edu/pjtheler0193/pics/tweak/casebefore.jpg>
I used a dremmel with a cutting disk for the initial rough cut, then a very fine hand held file for the finishing touches.
<img src=http://studentwebs.winona.edu/pjtheler0193/pics/tweak/fanclose.jpg><br>
<img src=http://studentwebs.winona.edu/pjtheler0193/pics/tweak/fanfar.jpg>
The cutout for the fan is so precise, that the fan is tightly held in place by friction.
Comment