GA-P35-S3G With 2 Sets Of KHX8500D2K2/2G

[glowingstar]

Hello All,

I am in the process of building new pc, I haven't purchased these items but I will:
M/B: Gigabyte GA-P35-S3G
CPU: Intel E7200 2.53Ghz 1066 3MB-Cache
RAM: 4x1GB Kingston HyberX 1066 5-5-5-15 2.2V KHX8500D2K2/2G

Could someone tell me if it's possible to run 4 sticks of ram I mention above at their rated speed with GA-P35-S3G board?
I've read that the board will pick the mems at 800mhz speed and I have to adjust mem settings manually in BIOS to rated speed, will it be stable at rated speed?.
By the way I won't oc my cpu.

[Lsdmeasap]

Re: GA-P35-S3G With 2 Sets Of KHX8500D2K2/2G

Yes it should be, you may need to add a fan on the NB 40mm to run that many sticks at 1066. And you will need to make some other memory and voltage adjustments

[glowingstar]

Re: GA-P35-S3G With 2 Sets Of KHX8500D2K2/2G

Thanks for the reply Lsdmeasap.
Will system run stable after voltage adjustments or there are chances that I will face issues running at 1066?.

[Lsdmeasap]

Re: GA-P35-S3G With 2 Sets Of KHX8500D2K2/2G

It should be fine you will just need to make some timing and voltage adjustments is all. You may need to or want to get a 40MM fan to add on the NB for running 4x1 will be hot on the NB

[glowingstar]

Re: GA-P35-S3G With 2 Sets Of KHX8500D2K2/2G

Hello Lsdmeasap,
So, running 4 sticks of rams means more heat and more voltage, will it shorten the life of board and ram? I know kinda stupid question but I am curious.

[Lsdmeasap]

Re: GA-P35-S3G With 2 Sets Of KHX8500D2K2/2G

No, And I mean voltages need adjusted in some other areas mainly MCH. And no it wont kill anything, all well under what would be dangerous.

[glowingstar]

Re: GA-P35-S3G With 2 Sets Of KHX8500D2K2/2G

Ahh, that's nice to know and Thanks again Lsdmeasap, gonna buy new reg.