No announcement yet.

GA-965P-S3 doesnt post with ocz 800 ram.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GA-965P-S3 doesnt post with ocz 800 ram.

    OCZ2P800R22GK

    can i make work these rams with tweaking bios?

  • #2
    Re: GA-965P-S3 doesnt post with ocz 800 ram.

    Brand new build/install?

    Yes, they will work. Are you SURE they are working sticks of ram? I mean if you just got them can you test them in another system to be sure they are not DOA?

    Try putting one stick in slot one and starting the system

    You did not post enough info for me to really know what you are asking

    Comment


    • #3
      Re: GA-965P-S3 doesnt post with ocz 800 ram.

      bios: F12


      i tried with one stick but unable to post again.
      i will try sticks with another mainboard.

      Comment


      • #4
        Re: GA-965P-S3 doesnt post with ocz 800 ram.

        IS this a new install or Build or had you been using it?

        Did you just update the BIOS?

        Please post your Full specs and if you can explain your question more

        Comment


        • #5
          Re: GA-965P-S3 doesnt post with ocz 800 ram.

          if you mean board revision by new install or build then v1.0
          no i didnt not just update bios.

          my problem is i cant post or get display with these rams
          but my old corsair 665 mhz rams works without problem.

          Comment


          • #6
            Re: GA-965P-S3 doesnt post with ocz 800 ram.

            No, I meant did you just setup windows or had you been using this PC. Sounds like you have been using it already.

            Ok, So you need to change some things in the BIOS for sure.

            Can you load the BIOS? If not you will need to put your old sticks back in and make some changes first before using the new sticks.

            What CPU do you have, and what speed are you running it at?

            This new ram, it is 2x2GB right?

            Please put in your old Sticks, and fill in your settings below. And then I will post back new settings for you to set (With the old sticks still in) then you will shut down and put in the new sticks. >>>>

            This is Just a template I use to ask people there settings, pay no attention to the numbers in it, replace with yours

            Robust Graphics Booster___________ [Auto]
            CPU Clock Ratio ____________ [8]
            CPU Host Clock Control_ [Enabled]
            CPU Host Frequency (MHz)__________ [450]
            PCI Express Frequency (Mhz)_______ [100]
            C.I.A. 2__________________________ [Disabled]
            System Memory Multiplier (SPD)____ [2.00]
            DRAM Timing Selectable_______ SPD __ [Manual]

            Performance Enhance = [Standard]

            CAS Latency Time________________ ?
            Dram RAS# to CAS# Delay_________ ?
            Dram RAS# Precharge Delay_______?
            Precharge Delay (tRAS)__________ ?
            ACT to ACT Delay (tRRD)_________ ?
            Rank Write to READ Delay________ ?
            Write to Precharge Delay_________ ?
            Refresh to ACT Delay______________ ?
            Read to Precharge Delay__________ ?
            Static tRead Value_______________ 1-31
            Static tRead Phase Adjust________ 1-31

            System Voltage Control____ [Manual]
            DDR2 OverVoltage Control__ [+0.300V]
            PCI-E OverVoltage Control_ [+0.1V]
            FSB OverVoltage Control___ [+0.1V]
            (G)MCH OverVoltage Control [+0.1V]
            CPU Voltage Control_______ [1.25]

            You WILL HAVE TO Answer the questions I posted above for me to help you.

            What language do you speak? Maybe I can translate your questions and you wont have to type such short answers. Feel free to post in your language if you need to and I can translate it.

            If you speak English, come on man, answer my questions properly so I can help you

            Comment

            Working...
            X