Announcement

Collapse
No announcement yet.

Need spec's for GA-EP35-DS3L

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need spec's for GA-EP35-DS3L

    GA-EP35-DS3L
    E8400
    HX520 corsair PS
    4850 Radeon GPU 512mb
    2X2G MUSHKIN 996587
    Xigmatek HDT-S1284 CPU cooler.
    Stuffed in CM690 coolmaster case<o:p></o:p>
    <o:p>

    </o:p> He will be mostly playing World of Warcraft, FEAR, various games and surfing the internet.
    <o:p> </o:p>
    I am looking for some speed but not at the cost of stability.
    <o:p> </o:p>
    <o:p> </o:p>
    Thanks in advance,
    <o:p> </o:p>
    Curtis

  • #2
    Re: Need spec's for GA-EP35-DS3L

    Overclocking or not? If so what would you like to run?

    Here would be optimal stock ranges for your setup >>


    Code:
    Robust Graphics Booster___________ [Auto or FAST]
    CPU Clock Ratio ____________ [9] 
    Fine Clock Ratio ____________[0.0]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [333] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.40]
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 4
    Dram RAS# Precharge Delay_______4
    Precharge Delay (tRAS)__________ 12
    
    ACT to ACT Delay (tRRD)_________ 3-4
    Rank Write to READ Delay________ 3-6
    Write to Precharge Delay_________ 4-6
    Refresh to ACT Delay______________ 48-50 (52-62)
    Read to Precharge Delay__________ 3-5
    Static tRead Value_______________6/7-10
    Static tRead Phase Adjust________ [Auto]
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.10V - +0.3V] 1.9-2.1 (1.9-2.0 should be fine at stock, but tighter timings will need more voltage like 2.0)
    
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V - +0.3] You may need +.2-.3 for this set of ram
    CPU Voltage Control_______ [Auto]
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB

    Comment

    Working...
    X