Hi Guys,
Got this board new and I after a day I just noticed this problem.
Any MCH Core Value above 1.460v will cause the mobo to boot twice and then stop on a black screen. Sometimes with a power down I can get into bios and see the red screen bad OC even with stock settings and only touching the MCH Core...
I clear cmos and get in setup setting any value from 1-1.460v is fine but after that is a no go.
Anyone know what may be causing this.
Tried to flash new bios, clear cmos, different ram etc nothing helps.
Got this board new and I after a day I just noticed this problem.
Any MCH Core Value above 1.460v will cause the mobo to boot twice and then stop on a black screen. Sometimes with a power down I can get into bios and see the red screen bad OC even with stock settings and only touching the MCH Core...
I clear cmos and get in setup setting any value from 1-1.460v is fine but after that is a no go.
Anyone know what may be causing this.
Tried to flash new bios, clear cmos, different ram etc nothing helps.
Comment