No announcement yet.

EP45-DS3R can not shutdown

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • EP45-DS3R can not shutdown

    I m using EP45-DS3R with E8400 with 3 x 1Gb kingston windows vista ultimate 32bits it s working fine, the problem is when I try to shutdown the pc , it shutdowns and reboots. when I did that from windows or manualy( because even if I hold power botton during bios start up it reboot)..it never shutdown by it self. I have to turn off the power. I tried to resolve the problem, by , changing PSU, the RAM , I flash the bios with F7, F9, F10 , and nothing. -EP45-DS3R Rev1.0 F10 -CPU E8400 C0 -3 x DDR2-SDRAM PC2-5300(333 mhz) no overcloking really I need help. any ideas ? thanks guys.
    Last edited by yssf; 01-09-2009, 06:26 PM.

  • #2
    Re: EP45-DS3R can not shutdown

    perhapes it s defect you should change it.

    Comment


    • #3
      Re: EP45-DS3R can not shutdown

      Is this matching ram? Can you give me a link to it?

      Put Performance Enhance on standard in the MIT Section of the BIOS and be sure to set your ram voltage.

      I need the above info before I can best advise you though, but if you have not set those things already please do and see if it helps

      Comment


      • #4
        Re: EP45-DS3R can not shutdown

        I reset the MIT. and my voltage is 1.8 for the ram and it s kingston kvr667d2n 5-5-5-15 , it s basic ram, no nothing changed , it driving me crazy, do need more details.. and thanks for your help

        Comment


        • #5
          Re: EP45-DS3R can not shutdown

          Yes, please give us your full settings and we will advise back. >>>

          This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

          Code:
          [b][u]MB Intelligent Tweaker(M.I.T.)[/u][/b]
          Robust Graphics Booster ...............: Auto or Fast
          CPU Clock Ratio ..........................: 
          Fine CPU Clock Ratio.....................:.0
          CPU Frequency ...........................: 
          
          
          [b][u]Clock Chip Control [/u][/b]
          [b][u]Standard Clock Control[/u][/b]
          CPU Host Clock Control..................: [Enabled] 
          CPU Host Frequency (Mhz) ............: Mhz
          [B]PCI Express Frequency (Mhz) .........:Set to 100[/B]
          
          C.I.A.2 .................................:[Disabled]
          
          
          [b][u]Advanced Clock Control [Press Enter][/u][/b]
          CPU Clock Drive...........................: <<< 800
          PCI Express Clock Drive.................: <<< 900
          CPU Clock Skew (ps)....................: <<< 
          MCH Clock Skew (ps)...................: <<< 
          
          
          [b][u]DRAM Performance Control[/u][/b][u][/u]
          [B]Performance Enhance...................: [STANDARD][/B]
          Extreme Memory Profile (X.M.P.).....: Disabled
          (G)MCH Frequency Latch...............: [Auto]
          System Memory Multiplier ..............: 
          Memory Frequency (Mhz) ..............: 
          DRAM Timing Selectable ................: [Manual]
          
          [b]Standard Timing Control[/b]
          CAS Latency Time........................
          tRCD .........................................
          tRP'...........................................
          tRAS..........................................
          
          Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
          
          [b][u]Advanced Timing Control[/u][/b]
          tRRD...........................................
          tWTR..........................................
          tWR............................................
          tRFC...........................................
          tRTP...........................................
          Command Rate (CMD) ....................:2
          
          [u][b]Driving Strength Profiles[/b][/u][b][/b]
          Driving Strength ............................
          
          [b]Channel A[/b]
          Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
           tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
          tRD Phase1 Adjustment...................:Auto
           tRD Phase2 Adjustment .................:Auto
           tRD Phase3 Adjustment..................:Auto
          Trd2rd(Different Rank)....................:Auto 
          Twr2wr(Different Rank)...................:Auto 
          Twr2rd(Different Rank)...................:Auto 
          Trd2wr(Same/Diff Rank)..................:Auto 
          Dimm1 Clock Skew Control...............:Auto  ps
          Dimm2 Clock Skew Control...............:Auto  ps
          
          [b]Channel B[/b]
          Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
           tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
          tRD Phase1 Adjustment...................:Auto
           tRD Phase2 Adjustment .................:Auto
           tRD Phase3 Adjustment..................:Auto
          Trd2rd(Different Rank)....................:Auto 
          Twr2wr(Different Rank)...................:Auto 
          Twr2rd(Different Rank)...................:Auto 
          Trd2wr(Same/Diff Rank)..................:Auto 
          Dimm1 Clock Skew Control...............:Auto  ps
          Dimm2 Clock Skew Control...............:Auto  ps
          
          [b][U]Motherboard Voltage Control[/U][/b][U][/U]
          Voltage Type.………... Manual
          [b]CPU[/b]
          CPU Vcore….……….........................:
          CPU Termination…..... 1.200V*.......: <<< Leave
          CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much
          
          CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
          
          CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
          
          [b]MCH/ICH[/b]
          MCH Core…………….....1.100V...........: << 
          MCH Reference….…….0.800V...........; <<< Leave
          MCH/DRAM Ref.…......0.900V...........: <<< Leave
          ICH I/O……………….....1.550V............: <<< Leave
          ICH Core…………...……1.100V............: <<< Leave
          
          [b]DRAM[/b]
          DRAM Voltage ……....1.800V............: 
          DRAM Termination .…0.900V............: <<< Leave
          Channel A Reference 0.900V............: <<< Leave
          Channel B Reference 0.900V............: <<< Leave
          
          [b][U]Advanced Settings[/U][/b][U][/U]
          Limit CPUID Max. to 3.....................: [Disabled]
          No-Execute Memory Protect............: [Enabled]
          CPU Enhanced Halt (C1E)................: [Disabled]
          C2/C2E State Support....................: [Disabled]
          x C4/C4E State Support..................: [Disabled]
          CPU Thermal Monitor 2(TM2) ...........: [Enabled]
          CPU EIST Function.........................: [Disabled]
          Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
          
          [b][U]Integrated Peripherals[/U][/b][U][/U]
          Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

          Comment


          • #6
            Re: EP45-DS3R can not shutdown

            Originally posted by Lsdmeasap View Post
            Yes, please give us your full settings and we will advise back. >>>

            This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

            Code:
            [B][U]MB Intelligent Tweaker(M.I.T.)[/U][/B]
            Robust Graphics Booster ...............: Auto 
            CPU Clock Ratio ..........................: 9x 
            Fine CPU Clock Ratio.....................:.+0.0
            CPU Frequency ...........................: 3.00 Ghz (333x9)
            
            
            [B][U]Clock Chip Control [/U][/B]
            [B][U]Standard Clock Control[/U][/B]
            CPU Host Clock Control..................: [Disabled] 
            CPU Host Frequency (Mhz) ............: 333Mhz
            [B]PCI Express Frequency (Mhz) .........:auto[/B]
            
            C.I.A.2 .................................:[Disabled]
            
            
            [B][U]Advanced Clock Control [Press Enter][/U][/B]
            CPU Clock Drive...........................: <<< 800mV
            PCI Express Clock Drive.................: <<< 900mV
            CPU Clock Skew (ps)....................: <<< 0ps
            MCH Clock Skew (ps)...................: <<< 0ps
            
            
            [B][U]DRAM Performance Control[/U][/B]
            [B]Performance Enhance...................: [STANDARD][/B]
            Extreme Memory Profile (X.M.P.).....: I do not have this lie
            (G)MCH Frequency Latch...............: [Auto]
            System Memory Multiplier ..............: auto 
            Memory Frequency (Mhz) ..............:667 
            DRAM Timing Selectable ................: [auto]
            
            [B]Standard Timing Control[/B]
            CAS Latency Time........................5 auto
            tRCD .........................................5 auto
            tRP'...........................................5 auto
            tRAS..........................................15 auto
            
            Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go===>> I can t change anything in the menu
            
            [B][U]Advanced Timing Control[/U][/B]
            tRRD...........................................3 auto
            tWTR..........................................3 auto
            tWR............................................5 auto
            tRFC...........................................36 auto
            tRTP...........................................3 auto
            Command Rate (CMD) ....................:0 auto
            
            [U][B]Driving Strength Profiles[/B][/U]
            Driving Strength ............................
            
            [B]Channel A[/B]
            Static tRead Value.........................:9 auto
             tRD Phase0 Adjustment...................:0 Auto <<< Leave for all below as well
            tRD Phase1 Adjustment...................:0 Auto
             tRD Phase2 Adjustment .................: 0 Auto
             tRD Phase3 Adjustment..................: 0 Auto
            Trd2rd(Different Rank)....................:6 Auto 
            Twr2wr(Different Rank)...................:6 Auto 
            Twr2rd(Different Rank)...................:5 Auto 
            Trd2wr(Same/Diff Rank)..................:8 Auto 
            Dimm1 Clock Skew Control...............:Auto 
            Dimm2 Clock Skew Control...............:Auto 
            
            [B]Channel B[/B]
            Static tRead Value.........................:9 auto  tRD Phase0 Adjustment...................:0 Auto <<< Leave for all below as well
            tRD Phase1 Adjustment...................:0 Auto
             tRD Phase2 Adjustment .................:0 Auto
             tRD Phase3 Adjustment..................:0Auto
            Trd2rd(Different Rank)....................:6 Auto 
            Twr2wr(Different Rank)...................:6Auto 
            Twr2rd(Different Rank)...................:5 Auto 
            Trd2wr(Same/Diff Rank)..................:8Auto 
            Dimm1 Clock Skew Control...............:Auto
            Dimm2 Clock Skew Control...............:Auto
            
            [B][U]Motherboard Voltage Control[/U][/B]
            Voltage Type.………... 
            [B]CPU[/B]
            CPU Vcore….………1.22500V auto....................:auto
            CPU Termination…..... 1.200V*.......: auto
            CPU PLL…………………....1.500V*.......: auto
            
            CPU Referen.…………....0.760V*.......:auto 
            
            I do not have this line ref2 : CPU Reference2………,,0.0V*.......:auto<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
            
            [B]MCH/ICH[/B]
            MCH Core…………….....1.100V...........:auto << 
            MCH Reference….…….0.760V...........;auto
            MCH/DRAM Ref.…......0.900V...........: auto<<< Leave
            ICH I/O……………….....1.500V............: auto
             I do not have this line: ICH Core…………...……00V............: <<< Leave
            
            [B]DRAM[/B]
            DRAM Voltage ……....1.800V............: 1.800V
            DRAM Termination .…0.900V............: auto
            Channel A Reference 0.900V............: auto
            Channel B Reference 0.900V............: auto
            
            [B][U]Advanced Settings[/U][/B]
            Limit CPUID Max. to 3.....................: [Disabled]
            No-Execute Memory Protect............: [Enabled]
            CPU Enhanced Halt (C1E)................: [Enabled]
            C2/C2E State Support....................: [Disabled]
            x C4/C4E State Support..................: [Disabled]
            CPU Thermal Monitor 2(TM2) ...........: [Enabled]
            CPU EIST Function.........................: [Enabled]
            Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
            
            [B][U]Integrated Peripherals[/U][/B]
            Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
            thanks man
            Last edited by yssf; 01-13-2009, 10:24 AM.

            Comment


            • #7
              Re: EP45-DS3R can not shutdown

              That is not suggested settings at all man, just a template for you to give me your settings back with that you are having issues with. You have to fill it in with your settings you are using and I will advise back

              Comment


              • #8
                Re: EP45-DS3R can not shutdown

                Originally posted by Lsdmeasap View Post
                That is not suggested settings at all man, just a template for you to give me your settings back with that you are having issues with. You have to fill it in with your settings you are using and I will advise back
                really I it s how it is , I don t overclock, I m using like it cames, I did not make any change in the bios from the first day . the mean time is auto,

                Comment

                Working...
                X