No announcement yet.

Ga-ep45-extreme q9550 8gb reaper

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ga-ep45-extreme q9550 8gb reaper

    I get about 3 hours through Everests Stability test and it reboots. I have been messing with the number for days.
    I use to get numerous errors or BSOD's, now just random reboots.... How can I tweak this to get it more stabile?
    Temps are: mb 35, cpu 46, core1 60, core2 54, core3 56, core4 56, gpu 43, nb 33.
    GA-EP45-EXTREME
    Q9550
    BigWater 760is
    PNY 9500 GT
    8 GB OCZ Reaper Memory
    Windows x64 Edition

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 8
    Fine CPU Clock Ratio.....................:.0.5
    CPU Frequency ...........................: 4.03

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 475
    PCI Express Frequency (Mhz) .........: 100
    C.I.A.2 .................................:[Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................: 0

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ..............: 1066 950
    DRAM Timing Selectable ................: [Manual]
    Standard Timing Control
    CAS Latency Time.............................. 5
    tRCD ......................................... 5
    tRP'.......................................... 5
    tRAS.......................................... 18
    Advanced Timing Control
    tRRD........................................... 3
    tWTR........................................... 3
    tWR............................................ 7
    tRFC........................................... 53
    tRTP........................................... 3
    Command Rate (CMD) ............................ 2
    Driving Strength Profiles
    Driving Strength ............................ 1066
    Channel A
    Static tRead Value.........................: 10
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    Channel B
    Static tRead Value.........................: 10
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.34375
    CPU Termination…..... 1.200V*.......: 1.26
    CPU PLL…………………....1.500V*.......: 1.5
    CPU Referen.…………....0.755V*.......: .860
    CPU Reference2………,,0.800V*.......: .913
    MCH/ICH
    MCH Core…………….....1.100V...........: 1.3
    MCH Reference….…….0.800V...........; Auto
    MCH/DRAM Ref.…......0.900V...........: Auto
    ICH I/O……………….....1.550V............: Auto
    ICH Core…………...……1.100V............: Auto
    DRAM
    DRAM Voltage ……....1.800V............: 1.80
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  • #2
    Re: Ga-ep45-extreme q9550 8gb reaper

    sounds like a mem voltage problem...trying giving your ram more voltage (as i doubt the stock voltage for 1066Mhz ram is 1.8V)...trying giving it 2.0V or upping it to 1.9V...

    And also seeing as though you are running 8GB of ram, try also upping the northbridge voltage...

    Comment


    • #3
      Re: Ga-ep45-extreme q9550 8gb reaper

      I really want to hit that 4.03 point, but it is difficult to tweak everything. I have learned that in some cases less is better than more. This is a trap that we all seem to be drawn into, thinking more voltage is better as long as it does create too much heat.

      Comment


      • #4
        Re: Ga-ep45-extreme q9550 8gb reaper

        Originally posted by Xevius View Post
        I really want to hit that 4.03 point, but it is difficult to tweak everything. I have learned that in some cases less is better than more. This is a trap that we all seem to be drawn into, thinking more voltage is better as long as it does create too much heat.
        Well if i am right, then the stability will be there...you can't have stability without providing enough voltages...

        1.3475 is a low voltage for 4.03Ghz on a quad...

        i would up that to about 1.36-1.37...

        Comment


        • #5
          Re: Ga-ep45-extreme q9550 8gb reaper

          Originally posted by Hooti3 View Post
          Well if i am right, then the stability will be there...you can't have stability without providing enough voltages...

          1.3475 is a low voltage for 4.03Ghz on a quad...

          i would up that to about 1.36-1.37...
          Be careful with the voltage. According to Intel the break voltage is 1.3625, I know that I do not want to go over that nor do I want to go over 70c.

          See Intel ® Coreâ„¢2 Quad Processor Q9550 - SLB8V

          Comment


          • #6
            Re: Ga-ep45-extreme q9550 8gb reaper

            Hy!

            Which Repaer is Yours?

            One Tip:

            CAS Latency Time.............................. 5
            tRCD ......................................... 5
            tRP'.......................................... 5
            tRAS.......................................... 18
            Advanced Timing Control
            tRRD........................................... 4
            tWTR........................................... 4
            tWR............................................8
            tRFC...........................................64-68
            tRTP........................................... 4
            Command Rate (CMD) ............................ 2

            Prime x64 small FFT is stable?
            Small FFT stress the CPU
            Blend Test stress the NB/Memory/CPU
            Last edited by szacsee; 01-18-2009, 06:06 AM.

            Comment

            Working...
            X