No announcement yet.

If you have a)UD3P mobo b)2x2Gb RAM c)F6 or F7 BIOS d)Issues Overclocking

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • If you have a)UD3P mobo b)2x2Gb RAM c)F6 or F7 BIOS d)Issues Overclocking

    I don't know if this has been done/created, but might there be something to these common components? If this is a trend maybe we could work out the kinks in one combined thread.

    Possibly save Lsdmeasap some work reading 1000 individual posts. I haven't received any help directly Lsdmeasap, but thank you for what you have posted/replied with so far.

  • #2
    Re: If you have a)UD3P mobo b)2x2Gb RAM c)F6 or F7 BIOS d)Issues Overclocking

    See here:

    http://forums.tweaktown.com/f69/p45-...problem-30021/

    When i set everything to DEFAULT (FSB333x8,5, DDR1066) i can boot and everything is fine. Even DDR 1080 is no Problem.

    But when i raise the MCH-Core Voltage over 1,2V the Board loop in Reboots. I must turn down FSB to 325 (DDR 1040), then i can boot.

    Comment

    Working...
    X