Mine UD3R 1.1 is fine and up running with 1,3 slot no problem.
I noticed both UD3P/R with rev 1.1 do still existing problem with ram slot (no post infamous) with few bad patches and might not able to fix it over firmware bios but physical hardware might need address problem quickly.
things they need fix now below.
1. Ensure check all 4 ram slots on boards.
2. More test QLV different sizes and brands of ram sticks.
3. Ensure 8-16gb will post with flexible memory configuration with automatic in bios without endless tweaks etc.
4. Fix it now or sell it then buy other brands that works out of box.
5. Go back to drawboard and pick Taiwan maker better over China over there.
That is my 2 cents.
pg
I noticed both UD3P/R with rev 1.1 do still existing problem with ram slot (no post infamous) with few bad patches and might not able to fix it over firmware bios but physical hardware might need address problem quickly.
things they need fix now below.
1. Ensure check all 4 ram slots on boards.
2. More test QLV different sizes and brands of ram sticks.
3. Ensure 8-16gb will post with flexible memory configuration with automatic in bios without endless tweaks etc.
4. Fix it now or sell it then buy other brands that works out of box.
5. Go back to drawboard and pick Taiwan maker better over China over there.
That is my 2 cents.
pg
Comment