All set with UD3P with E8400 @ 3.6 (thank to Outer....)
stable Like a Rock and running 24/7...
When I Hibernate/Sleep in Vista 64 and press the Keyboard to resume
from Overnight, the pc start but do not respond and reboot
when I verified the clock speed with CPUZ it shows 2.999
Going back into the Bios There is a red warning message stating
a problem with overclocking or voltage all setting are there i just have to press F10 and I am back to 3.6....
Strange enough if I hibernate and return shortly no problem..
Is it a software related or hardware.....?
Note: I have run all test possible including intel burn for 20pass
all pass
stable Like a Rock and running 24/7...
When I Hibernate/Sleep in Vista 64 and press the Keyboard to resume
from Overnight, the pc start but do not respond and reboot
when I verified the clock speed with CPUZ it shows 2.999
Going back into the Bios There is a red warning message stating
a problem with overclocking or voltage all setting are there i just have to press F10 and I am back to 3.6....
Strange enough if I hibernate and return shortly no problem..
Is it a software related or hardware.....?
Note: I have run all test possible including intel burn for 20pass
all pass
Comment