BIOS Templates
Originally posted by Lsdmeasap
X58 & P55/P57
X58
This is Just a template We use to ask people their settings, pay no attention to the numbers in it, replace with yours
0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
0X00000101 << Not enough Vcore Voltage
CPU = Model #
Motherboard = Model, Revision #
BIOS Version =
Ram = Brand, Model#, Part#, And or Link
Code:
[B]Advanced CPU Features:[/B] CPU Clock Ratio ................................ [20x] Intel(R) Turbo Boost Tech .................. [Enabled] CPU Cores Enabled ............................ [All] CPU Multi Threading .......................... [Enabled] CPU Enhanced Halt (C1E) ................... [Disabled] C3/C6/C7 State Support .................... [Disabled] CPU Thermal Monitor ......................... [Enabled] CPU EIST Function ............................ [Disabled] Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs Bi-Directional PROCHOT ..................... [Enabled] [B]Uncore & QPI Features:[/B] QPI Link Speed .............................. x36 Uncore Frequency .......................... (Always 2x memory Multi or 2x +1) Isonchronous Frequency ..................[Enabled] [B]Standard Clock Control:[/B] Base Clock (BCLK) Control ................ [Enabled] BCLK Frequency (MHz) ..................... PCI Express Frequency (MHz) ........... [100] C.I.A.2 [Disabled] [B]Advanced Clock Control:[/B] CPU Clock Drive ..............................[800mV] PCI Express Clock Drive ................... [900mV] CPU Clock Skew ............................. [0ps] IOH Clock Skew ............................. [0ps] [B]Advanced DRAM Features:[/B] Performance Enhance ...................... [Standard] Extreme Memory Profile (X.M.P) ......... [Disabled] System Memory Multiplier (SPD) ........ [AUTO] DRAM Timing Selectable (SPD) .......... [Manual] [B]Channel A + B + C Channel A Timing Settings:[/B] ##Channel A Standard Timing Control## CAS Latency Time ...................... tRCD ....................................... tRP ......................................... tRAS ....................................... Below values may be left in Auto if you like, generally this is fine. For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here [url=http://www.xtremesystems.org/forums/showpost.php?p=3969957&postcount=3615]XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread[/url] ##Channel A Advanced Timing Control## tRC ........................................ (Should be = tRAS + tRP or above for stability) tRRD ....................................... tWTR ...................................... (Must be Write to Read Delay/Same Rank - (tWL + 4) tWR ........................................ tWTP ....................................... (tWTP Must = tWR + tWL + 4) tWL ........................................ (tWL Must be CAS Latency -1) tRFC ....................................... tRTP ....................................... tFAW ...................................... Command Rate (CMD) ................ ##Channel A Misc Timing Control## Round Trip Latency ................... B2B CAS Delay .......................... [B]Advanced Voltage Control: CPU[/B] Load Line Calibration ................. [Disabled] CPU Vcore ............................... QPI/VTT Voltage 1.150v ............ CPU PLL 1.800v ....................... [B]MCH/ICH[/B] PCIE 1.500v ........................... QPI PLL 1.100v ....................... IOH Core 1.100v ..................... ICH I/O 1.500v ....................... ICH Core 1.1v ........................ [B]DRAM[/B] DRAM Voltage 1.500v .............. DRAM Termination 0.750v [AUTO] Ch-A Data VRef. 0.750v [AUTO] Ch-B Data VRef. 0.750v [AUTO] Ch-C Data VRef. 0.750v [AUTO] Ch-A Address VRef. 0.750v [AUTO] Ch-B Address VRef. 0.750v [AUTO] Ch-C Address VRef. 0.750v [AUTO]
XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread
P55/P57
Code:
[B]Advanced Frequency Settings:[/B] CPU Clock Ratio 21x [B]Advanced Core Features [Press Enter]:[/B] Intel(R) Turbo Boost Tech................[Disabled] CPU Cores Enabled........................[All] CPU Multi-Threading......................[Disabled] CPU Enhanced Halt (C1E)..................[Auto] C3/C6/C7 State Support...................[Auto] CPU Thermal Monitor......................[Auto] CPU EIST Function........................[Auto] Bi-Directional PROCHOT...................[Auto] QPI Clock Ratio..........................[Auto] [I]QPI Link Speed........................[x][/I] [I]Uncore Clock Ratio....................[18x][/I] Uncore Frequency.........................3600MHz [B]>>>>> Standard Clock Control <<<<<[/B] Base Clock (BCLK) Control................[Enabled] BCLK Frequency ..........................[200] Extreme Memory Profile (X.M.P.)..........[Disabled] System Memory Multiplier (SPD)...........[Disabled] [I]Memory Frequency (MHz)................2000[/I] PCI Express Frequency (MHz)..............[Auto] C.I.A.2..................................[Disabled] [B]>>>>> Advanced Clock Control <<<<<[/B] CPU Clock Drive..........................[ 800mV] PCI Express Clock Drive..................[ 900mV] CPU Clock Skew...........................[ 0ps] [B]Advanced Memory Settings:[/B] Extreme Memory Profile (X.M.P.)..........[Disabled] System Memory Multiplier (SPD)...........[10.0] [I]Memory Frequency (MHz)................2000[/I] Performance Enhance (SPD)............. [Turbo] DRAM Timing Selectable (SPD)............ [Expert] [I]Profile DDR Voltage .................. Profile QPI Voltage ..................[/I] Channel Interleaving.....................[Auto] Rank Interleaving........................[Auto] [B]>>>>> Channel A & B[/B] Channel A Timing Settings [Press Enter]: Cas Latency Time........................[8] tRCD....................................[8] tRP.....................................[9] tRAS...................................[24] >>>>> Advanced Timing Control tRC....................................[Auto] tRRD...................................[Auto] tWTR...................................[Auto] tWR....................................[Auto] tWTP...................................[Auto] tWL....................................[Auto] tRFC...................................[Auto] tRTP...................................[Auto] tFAW...................................[Auto] Command Rate (CMD).................. 1 [1] [B]>>>>> Misc Timing Control[/B] B2B Cas Delay..........................[Auto] Round Trip Latency.....................[Auto] Channel A Turnaround Settings [Press Enter]: Different DIMMs........................[Auto] Different DIMMs........................[Auto] On The Same Rank.......................[Auto] [B]>>>>> Channel A Writes Followed By Writes[/B] Different DIMMs........................[Auto] Different DIMMs........................[Auto] On The Same Rank.......................[Auto] [B]Advanced Voltage Settings:[/B] ******Mother Board Voltage Control ****** Voltage Types............Normal......Current -------------------------------------------- [B]>>> CPU[/B] Load Line Calibration...................[Level 2] CPU Vcore..................1.19375v..[1.xv] QPI/VTT Voltage..........1.100v.....[1.x00v] [B]>>> MCH/ICH[/B] PCH Core....................1.050v.....[Auto] CPU PLL......................1.800v.....[Auto] [B]>>> DRAM[/B] DRAM Voltage..............1.500v.....[1.660v] DRAM Termination.........0.750v.....[Auto] Ch-A Data VRef............0.750v.....[Auto] Ch-A Data VRef............0.750v.....[Auto] Ch-B Data VRef............0.750v.....[Auto] Ch-B Data VRef............0.750v.....[Auto] [B]Miscellaneous Settings:[/B][/SIZE] Isochronous Support....................[Enabled] Virtualisation technology..............[Enabled] USB Storage Detect ....................[Disabled] Located In Integrated Peripherals Page
Comment