GA-EP45-UD3P Issues with RAID Controller:
I have the board set up like this...
Purple SATA Ports
RAID1: 500GB (OS)
[Sata_0 : 500GB WD]
[Sata_1 : 500GB WD]
Yellow SATA Ports
Sata_0 : Anything
RAID5: 3.7TB (Storage)
[Sata_1 : 1000GB WD]
[Sata_2 : 1000GB WD]
[Sata_3 : 1000GB WD]
[Sata_4 : 1000GB WD]
[Sata_5 : 1000GB WD]
Now here is the issue.... Whenever I put a drive in Sata_0 on the Yellow ports the board freezes. It will post all the way to the where it starts checking what device to boot off of (Cd-rom, hard drive) and freezes. When I take the drive out its fine.
I have the board set up like this...
Purple SATA Ports
RAID1: 500GB (OS)
[Sata_0 : 500GB WD]
[Sata_1 : 500GB WD]
Yellow SATA Ports
Sata_0 : Anything
RAID5: 3.7TB (Storage)
[Sata_1 : 1000GB WD]
[Sata_2 : 1000GB WD]
[Sata_3 : 1000GB WD]
[Sata_4 : 1000GB WD]
[Sata_5 : 1000GB WD]
Now here is the issue.... Whenever I put a drive in Sata_0 on the Yellow ports the board freezes. It will post all the way to the where it starts checking what device to boot off of (Cd-rom, hard drive) and freezes. When I take the drive out its fine.
Comment