Tweet
If i leave my computer off for about 4 hours or more.. when I come back only 4 out of 6 gigs will register in bios and obviously xp.
I had this problem about 3 weeks ago.. so i went back to microcenter.. swapped out for another ud5 mobo and ordered a completely different set of ram instead of the ocz i had. I went for G. skill 1600 7-8-7-24 1.5v instead of the ocz which was slower and used 1.65v. Plus the G. Skill has xmp so i figured it might help. Well it was working fine up until a couple of days ago once I flashed my bios from F1 to F5.. which I did (even though it was working fine) to make sure it was compatible with the 930.
If i boot.. let it warm up for a min.. power off.. restart.. everything is fine and i'm almost content doing that since it hauls ass when it's working well.
But it should work fine. So please help.
It does it when it's at stock 2.8 clock or in any overclocked speed.. currently i'm at 4.26ghz so thats what i'll show but it does it in 2.8 as well.
Originally on the first board i check cpu pins twice.. loosened the waterblock to no avail.. this time i was extra extra careful putting it on just in case
My temps are great 30 idle, 55 full tilt.
I probably should flash backwards and see if it still does it.. but I hate that whole process in the first place, so hopefully someone can shed some light. My bet really is F5 bios has an issue since this is my 2nd board and a totally different set of ram.
Advanced CPU Features:
CPU Clock Ratio ................................ [21x]
Intel(R) Turbo Boost Tech .................. [Disabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Disabled]
CPU Enhanced Halt (C1E) ................... [Enabled]
C3/C6/C7 State Support .................... [Disable]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Enabled]
Virtualization Technology ................... [Enabled]
Bi-Directional PROCHOT ..................... [Enabled]
Uncore & QPI Features:
QPI Link Speed .............................. x36
Uncore Frequency ..........................
Isonchronous Frequency ..................[Enabled]
Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... 203MHz
PCI Express Frequency (MHz) ........... [100]
C.I.A.2 [Disabled]<-- not in my bios
Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]
Advanced DRAM Features:
Performance Enhance ...................... [Standard]
Extreme Memory Profile (X.M.P) ......... [Enabled]
System Memory Multiplier (SPD) ........ 8.0
DRAM Timing Selectable (SPD) .......... [Auto]
Channel A + B + C
Channel A Timing Settings:
CAS Latency Time ...................... 7
tRCD ....................................... 8
tRP ......................................... 7
tRAS ....................................... 24 (from XMP settings)
##Channel A Advanced Timing Control##
tRC ........................................ 40 (Should be = tRAS + tRP or above for stability)
tRRD ....................................... 5
tWTR ...................................... 6 (Must be Write to Read Delay/Same Rank - (tWL + 4)
tWR ........................................ 12
tWTP ....................................... 24 (tWTP Must = tWR + tWL + 4)
tWL ........................................ 8 (tWL Must be CAS Latency -1)
tRFC ....................................... 88
tRTP ....................................... 6
tFAW ...................................... 50
Command Rate (CMD) ................ 2 (all from XMP settings)
##Channel A Misc Timing Control##
Round Trip Latency ................... 56
Advanced Voltage Control:
CPU Load Line Calibration ................. Level1
CPU Vcore ............................... 1.34375V
QPI/VTT Voltage 1.150v …………1.260V
CPU PLL 1.800v ....................... [AUTO]
MCH/ICH
PCIE 1.500v ........................... [AUTO]
QPI PLL 1.100v ....................... [1.1]
IOH Core 1.100v ..................... [1.16]
ICH I/O 1.500v ....................... [1.5]
ICH Core 1.1v ........................ [1.14]
DRAM
DRAM Voltage 1.500v .............. 1.500V
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]</pre>
intel i7 930
Gskill 7-8-7-24 3x2gb sticks
Sapphire HD5850
PC Power & Cooling 750w
raptor 74's raid 0
SB x-fi Fatal1ty Champion edition
Watercooled Apogee XT block, ic diamond 7 TIM
I had this problem about 3 weeks ago.. so i went back to microcenter.. swapped out for another ud5 mobo and ordered a completely different set of ram instead of the ocz i had. I went for G. skill 1600 7-8-7-24 1.5v instead of the ocz which was slower and used 1.65v. Plus the G. Skill has xmp so i figured it might help. Well it was working fine up until a couple of days ago once I flashed my bios from F1 to F5.. which I did (even though it was working fine) to make sure it was compatible with the 930.
If i boot.. let it warm up for a min.. power off.. restart.. everything is fine and i'm almost content doing that since it hauls ass when it's working well.
But it should work fine. So please help.
It does it when it's at stock 2.8 clock or in any overclocked speed.. currently i'm at 4.26ghz so thats what i'll show but it does it in 2.8 as well.
Originally on the first board i check cpu pins twice.. loosened the waterblock to no avail.. this time i was extra extra careful putting it on just in case
My temps are great 30 idle, 55 full tilt.
I probably should flash backwards and see if it still does it.. but I hate that whole process in the first place, so hopefully someone can shed some light. My bet really is F5 bios has an issue since this is my 2nd board and a totally different set of ram.
Advanced CPU Features:
CPU Clock Ratio ................................ [21x]
Intel(R) Turbo Boost Tech .................. [Disabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Disabled]
CPU Enhanced Halt (C1E) ................... [Enabled]
C3/C6/C7 State Support .................... [Disable]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Enabled]
Virtualization Technology ................... [Enabled]
Bi-Directional PROCHOT ..................... [Enabled]
Uncore & QPI Features:
QPI Link Speed .............................. x36
Uncore Frequency ..........................
Isonchronous Frequency ..................[Enabled]
Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... 203MHz
PCI Express Frequency (MHz) ........... [100]
C.I.A.2 [Disabled]<-- not in my bios
Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]
Advanced DRAM Features:
Performance Enhance ...................... [Standard]
Extreme Memory Profile (X.M.P) ......... [Enabled]
System Memory Multiplier (SPD) ........ 8.0
DRAM Timing Selectable (SPD) .......... [Auto]
Channel A + B + C
Channel A Timing Settings:
CAS Latency Time ...................... 7
tRCD ....................................... 8
tRP ......................................... 7
tRAS ....................................... 24 (from XMP settings)
##Channel A Advanced Timing Control##
tRC ........................................ 40 (Should be = tRAS + tRP or above for stability)
tRRD ....................................... 5
tWTR ...................................... 6 (Must be Write to Read Delay/Same Rank - (tWL + 4)
tWR ........................................ 12
tWTP ....................................... 24 (tWTP Must = tWR + tWL + 4)
tWL ........................................ 8 (tWL Must be CAS Latency -1)
tRFC ....................................... 88
tRTP ....................................... 6
tFAW ...................................... 50
Command Rate (CMD) ................ 2 (all from XMP settings)
##Channel A Misc Timing Control##
Round Trip Latency ................... 56
Advanced Voltage Control:
CPU Load Line Calibration ................. Level1
CPU Vcore ............................... 1.34375V
QPI/VTT Voltage 1.150v …………1.260V
CPU PLL 1.800v ....................... [AUTO]
MCH/ICH
PCIE 1.500v ........................... [AUTO]
QPI PLL 1.100v ....................... [1.1]
IOH Core 1.100v ..................... [1.16]
ICH I/O 1.500v ....................... [1.5]
ICH Core 1.1v ........................ [1.14]
DRAM
DRAM Voltage 1.500v .............. 1.500V
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]</pre>
intel i7 930
Gskill 7-8-7-24 3x2gb sticks
Sapphire HD5850
PC Power & Cooling 750w
raptor 74's raid 0
SB x-fi Fatal1ty Champion edition
Watercooled Apogee XT block, ic diamond 7 TIM
Comment