Tweet
Hi,
Got a replacement motherboard for the GA-P67A-UD5-B2 that I had purchased (it was recalled because of the SATA degrading issue). Installed the new B3, worked fine. For my birthday, I got one of the new Crucial 64GB M4 SSDs, which I'd put in and it all worked fine. I was using the computer as normal, put it down for a reboot and now it won't boot at all, not even into the BIOS, and it cycles like this. Motherboard lights up, fans spin for a second or so, then the whole machine clicks off again, and the lights switch to the pattern that you get when the computer is off. The computer then switches back on, motherboard lights up, fans spin, and switches off again. This continues for a long time.
I've removed ALL hardware from the motherboard excluding the CPU. This is the spec of the machine:
CPU: Intel i7-2600k
RAM: 2x8gb 1333MHz G-Skill Ripjaws
MB: GA-P67-UD5
HDD: 1x Seagate Momentus XD 500gb, 1x Crucial M4 64gb SSD
GFX: Gigabyte GTX 460
All hardware has been working previously on the old MB - every single piece of hardware had been working on the new MB. I had overclocked it to 3.60GHz (for one boot) using the packaged software, but had decided I didn't want to risk damaging my setup and put it back down to the default values straight after.. Can anybody point me towards the problem? Thanks in advance.
Got a replacement motherboard for the GA-P67A-UD5-B2 that I had purchased (it was recalled because of the SATA degrading issue). Installed the new B3, worked fine. For my birthday, I got one of the new Crucial 64GB M4 SSDs, which I'd put in and it all worked fine. I was using the computer as normal, put it down for a reboot and now it won't boot at all, not even into the BIOS, and it cycles like this. Motherboard lights up, fans spin for a second or so, then the whole machine clicks off again, and the lights switch to the pattern that you get when the computer is off. The computer then switches back on, motherboard lights up, fans spin, and switches off again. This continues for a long time.
I've removed ALL hardware from the motherboard excluding the CPU. This is the spec of the machine:
CPU: Intel i7-2600k
RAM: 2x8gb 1333MHz G-Skill Ripjaws
MB: GA-P67-UD5
HDD: 1x Seagate Momentus XD 500gb, 1x Crucial M4 64gb SSD
GFX: Gigabyte GTX 460
All hardware has been working previously on the old MB - every single piece of hardware had been working on the new MB. I had overclocked it to 3.60GHz (for one boot) using the packaged software, but had decided I didn't want to risk damaging my setup and put it back down to the default values straight after.. Can anybody point me towards the problem? Thanks in advance.
Comment