I just recently purchased a new machine and have been experiencing high temps (I think). I'm not really technically inclined when it comes to specifics but I know my way around a computer well enough to get by. I have the x58 ud3r board with an i7 950, corsair H60 water cooling with an additional cooler master 120mm fan attached, Haf X case with both 200mm fans on top, and NZXT sensor. Not sure if graphics cards matter but 2 GTX 560 ti as well. When I first start up my computer it'll idle anywhere from 35-45 and as soon as I start running anything it gradually heats up to ~50-55, depending on what I'm running close to 60. I havn't let it get over 60 yet so I don't really know how high it actually goes.
Now I actually started out initially with only the 1 200mm fan on the top (back), and no cooler master fan on the other side of the H60. But the temperatures remain unchanged since adding the extra 2 fans. All other sensors including the graphics cards, RAM, and storage devices stay pretty low with the graphics cards so far peaking at 35. I've looked around a little bit and people look to run at 40-45 after hours where I get almost 60 temps after 20 minutes. All fans are working fine.
Now I actually started out initially with only the 1 200mm fan on the top (back), and no cooler master fan on the other side of the H60. But the temperatures remain unchanged since adding the extra 2 fans. All other sensors including the graphics cards, RAM, and storage devices stay pretty low with the graphics cards so far peaking at 35. I've looked around a little bit and people look to run at 40-45 after hours where I get almost 60 temps after 20 minutes. All fans are working fine.
Comment