first time ocer over clock celeron d 437 with ga-g41-es2l motherboard

[keith01]

is there any one can guide me how to overclock my intel celeron d 437 with stock cooling fan.

this is my first time. i tried to read in some other forum and follow the steps but its always a failure, my unit doesnt boot after changing or orcing something in bios.

my pc specs is;

Motherboard - gigabyte g41-es2l
memory - 2gb ddr2 667 (2x1gb)
processor - intel celeron d 437
500 watts psu
250gb western digital hdd

my last setting was
cl-5
trcd-5
trp-5
tras-5
dram volt -1.9v
cpu host frequency 155
and the rest are set as auto

but after doing that changes my rig doesn't boot up and reset itself to default settings after a few minutes.


please guide me.

[Chike]

Re: first time ocer over clock celeron d 437 with ga-g41-es2l motherboard

If you have EasyTune installed please post a screen capture of ResyTune -> Advanced -> Voltage tab (Alt+Print screen to capture front active window only), paste in your favorite image editing software, save as PNG and attach to the post (Go Advanced).
Also Please attach a text report of CPU-Z (CPU-Z -> About tab -> Save Report (.TXT))