Hi
I have this little problem with my rig.
when i build it it worked as it should even at 4.5Ghz. then i moved it and now the CPU is unstable at OC and the SB is getting hot very fast and the fan starts at 6500 RPM but cant keep up with the heat. sometimes my screen just goes black with some white lines or stats to blink.
i have tried to clear cmos / bios
start it up again, same thing sb gets too hot
the only thing that works is running it with one VGA
My specs are:
Asrock - x79 Extreme 9
Intel i7 - 3930K (stock)
G.skill - F3-19200CL11Q-16GBZHD Quard CH (set to 2133 - running 1066 cant go any higher (windows boot freeze))
ASUS - NVIDIA-ENGTX560-TI-DCII/2DI/1GD5/1G-DDR5 (SLI)
Corsair - Force GT 120 GB
2x WD - 320 GB Raid-0
PSU 1000 watt
Bios = 2.00
does some one have a clue what could be wrong here?
does someone know how i can run my RAM at 2400 Mhz? (is this only possible in dual CH?)
I seriously dont know whats wrong :(
Sorry for my english.
I have this little problem with my rig.
when i build it it worked as it should even at 4.5Ghz. then i moved it and now the CPU is unstable at OC and the SB is getting hot very fast and the fan starts at 6500 RPM but cant keep up with the heat. sometimes my screen just goes black with some white lines or stats to blink.
i have tried to clear cmos / bios
start it up again, same thing sb gets too hot
the only thing that works is running it with one VGA
My specs are:
Asrock - x79 Extreme 9
Intel i7 - 3930K (stock)
G.skill - F3-19200CL11Q-16GBZHD Quard CH (set to 2133 - running 1066 cant go any higher (windows boot freeze))
ASUS - NVIDIA-ENGTX560-TI-DCII/2DI/1GD5/1G-DDR5 (SLI)
Corsair - Force GT 120 GB
2x WD - 320 GB Raid-0
PSU 1000 watt
Bios = 2.00
does some one have a clue what could be wrong here?
does someone know how i can run my RAM at 2400 Mhz? (is this only possible in dual CH?)
I seriously dont know whats wrong :(
Sorry for my english.
Comment