Hey guys,
I plan to upgrade my current build into a new NZXT Switch 810. I'm Planning to watercool with a 420 Rad in the top and a 280 Rad in the bottom. I'm planning a total of 14 fans in this build and I want to hook them up to a fan controller, the Bitfenix Recon to be precise. I don't know if it will power all the fans but i hope it will. The description of the Bitfenix Recon fan controller says it delivers 10w per channel. Ill try to give an idea of how I want the fans attached and if this isn't possible then any help would be appreciated. I want to put 3 fans NZXT 140mm Blue LED ( NZXT 140 x 140 x 25mm 1000RPM Case Fan Blue LED : FZ-140-B |Specialtech UK Water Cooling Shop ) in the top section connected via a fan splitter ( Akasa Flexa FP3S 300mm PWM Fan Splitter Cable for 3 Fans Powered by SATA : AK-CBFA06-30 |Specialtech UK Water Cooling Shop ) to one of the 5 channels, and 3 Gelid Wing 140mm UV ( Gelid Solutions Wing 14 UV Blue 140mm High Performance Case Fan |Specialtech UK Water Cooling Shop) on the other side of the top Rad connected to another channel via another fan splitter like the top 3. I also want to attach 2 NZXT 140mm Non LED fans ( NZXT 140 x 140 x 25mm 1000RPM Case Fan Black : FZ-140 |Specialtech UK Water Cooling Shop ) to the underside of my bottom mounted Rad and 2 of the Gelid Wing 140mm UV on the top of the Rad. I would like to attach all 4 of these fans to one channel. I couldn't find any 4 splitters on this site but I've found a 5 splitter ( Akasa Flexa FP5S 450mm PWM Fan Splitter Cable for 5 Fans Powered by SATA : AK-CBFA07-45 |Specialtech UK Water Cooling Shop ). Hopefully I can attach these to one channel, even though these are different fans and the RPM's are different. To finish, I want to attach the 2 front NZXT 140mm Blue LED fans to another channel via ( Akasa PWM Fan Splitter Supports 2 PWM Fans From a Single Motherboard PWM Header 15cm : AK-CBFA04-15 |Specialtech UK Water Cooling Shop
I plan to upgrade my current build into a new NZXT Switch 810. I'm Planning to watercool with a 420 Rad in the top and a 280 Rad in the bottom. I'm planning a total of 14 fans in this build and I want to hook them up to a fan controller, the Bitfenix Recon to be precise. I don't know if it will power all the fans but i hope it will. The description of the Bitfenix Recon fan controller says it delivers 10w per channel. Ill try to give an idea of how I want the fans attached and if this isn't possible then any help would be appreciated. I want to put 3 fans NZXT 140mm Blue LED ( NZXT 140 x 140 x 25mm 1000RPM Case Fan Blue LED : FZ-140-B |Specialtech UK Water Cooling Shop ) in the top section connected via a fan splitter ( Akasa Flexa FP3S 300mm PWM Fan Splitter Cable for 3 Fans Powered by SATA : AK-CBFA06-30 |Specialtech UK Water Cooling Shop ) to one of the 5 channels, and 3 Gelid Wing 140mm UV ( Gelid Solutions Wing 14 UV Blue 140mm High Performance Case Fan |Specialtech UK Water Cooling Shop) on the other side of the top Rad connected to another channel via another fan splitter like the top 3. I also want to attach 2 NZXT 140mm Non LED fans ( NZXT 140 x 140 x 25mm 1000RPM Case Fan Black : FZ-140 |Specialtech UK Water Cooling Shop ) to the underside of my bottom mounted Rad and 2 of the Gelid Wing 140mm UV on the top of the Rad. I would like to attach all 4 of these fans to one channel. I couldn't find any 4 splitters on this site but I've found a 5 splitter ( Akasa Flexa FP5S 450mm PWM Fan Splitter Cable for 5 Fans Powered by SATA : AK-CBFA07-45 |Specialtech UK Water Cooling Shop ). Hopefully I can attach these to one channel, even though these are different fans and the RPM's are different. To finish, I want to attach the 2 front NZXT 140mm Blue LED fans to another channel via ( Akasa PWM Fan Splitter Supports 2 PWM Fans From a Single Motherboard PWM Header 15cm : AK-CBFA04-15 |Specialtech UK Water Cooling Shop
Comment