If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Manual says that error code is reserved. Have you tried to clear cmos short and long? Try with minimal hardware, 1 stick ram no GPU 1 hdd, no USB devices?
Main Rig Gigabyte z87x-OC
Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
HiS ATI HD 6950
Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
CORSAIR CMPSU-850TX PSU
Swiftech MCP655-B Pump
EK Supremacy Cpu Block
Swiftech Mcres Micro Rev 2 Reservoir
Black Ice GTX Xtreme 360 Radiator
I would suggest doing a cmos clear and loading optimized defaults and see if it continues. Maybe reflash bios, Also make sure backup bios and main bios have same bios version installed.
Main Rig Gigabyte z87x-OC
Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
HiS ATI HD 6950
Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
CORSAIR CMPSU-850TX PSU
Swiftech MCP655-B Pump
EK Supremacy Cpu Block
Swiftech Mcres Micro Rev 2 Reservoir
Black Ice GTX Xtreme 360 Radiator
I would suggest doing a cmos clear and loading optimized defaults and see if it continues. Maybe reflash bios, Also make sure backup bios and main bios have same bios version installed.
Thx will try, but since we have debug screen should we have list of all codes and what does it mean or at lest in which direction to dig?
Manual has all the codes listed, but for this code the only info is reserved. I have sent a email to my contact at gigabyte and ask him if they have any more info on it. I am waiting to hear back from him on this.
Main Rig Gigabyte z87x-OC
Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
HiS ATI HD 6950
Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
CORSAIR CMPSU-850TX PSU
Swiftech MCP655-B Pump
EK Supremacy Cpu Block
Swiftech Mcres Micro Rev 2 Reservoir
Black Ice GTX Xtreme 360 Radiator
Manual has all the codes listed, but for this code the only info is reserved. I have sent a email to my contact at gigabyte and ask him if they have any more info on it. I am waiting to hear back from him on this.
Thx! did re flash BIOS - it 2nd day without "04" code... also maybe this is "D4"??? not "04"
the D would be lower case then, as it would be too hard to tell D and 0 apart, so it is 0.
Some codes are reserved for internal testing like 8_ they are used for debugging if an odd codes come in. So does your board hang on that? Or it just says it while you are in windows or something?
Comment