Announcement

Collapse
No announcement yet.

New rig issue

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    New rig issue

    Hey guys,

    I just bought a new setup:

    Intel i7 3770K
    Gigabyte GA-Z77X-UD3H
    MSI GTX 660 TFZ
    8GB corsair vengeance 1600

    I've connected them all correctly... there mobo has a panel for debugging, and it says: "97" which means:"Console Output devices connect (ex. Monitor is lighted)"

    i tried to remove the GFX card and to use the onboard. It worked. I tried to install windows, but the keyboard and the mouse is not working on the installation process...

    Not sure what's going on wrong here...the gfx card should work just fine....any ideas? :( It's driving me crazy
    Tags: None
  • #2
    Re: New rig issue

    Try using the USB 2.0 ports until you can install USB 3.0 drivers. If front ones don't work try back ones.
    Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
    Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
    PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
    Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
    Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me

     Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
    HTPC: Z68 Pro3 M / 2105
    SOLD:Z97X-UD5H /4790K/F11b mod BIOS/[email protected] 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
    SOLD:Z87X-UD5H /4770K

    Comment

    • #3
      Re: New rig issue

      There are no USB 2.0 ports on the motherboard :(

      What the heck is wrong?
      Shouldn't it recognise the devices as 2.0?
      Why when i plug the GFX card it doesn't boot up? :(
      Though the fans of the GFX work...

      The PSU is 600W by the way, shouldn't it be enough?
      Last edited by gmaister22; 10-21-2012, 05:41 AM.

      Comment

      • #4
        Re: New rig issue

        Ah. All the USB 2.0 are on internal headers, then? Some keyboards aren't recognized on these Gigabyte boards until BIOS updates, but honestly my Z77 experience is with the UD5H and not your board.
        If you have any other keyboards I would try them, and for sure try both front panel and rear slots. I've been lucky with my wireless KB's but even some wired ones have been problematic with the Z77 boards.

        If it were me I would work on getting the KB working then worry about the graphics card, if you can. Maybe a good CMOS clear might help-and it couldn't hurt.
        Last edited by boondocks; 10-21-2012, 07:39 AM.
        Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
        Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
        PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
        Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
        Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me

         Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
        HTPC: Z68 Pro3 M / 2105
        SOLD:Z97X-UD5H /4790K/F11b mod BIOS/[email protected] 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
        SOLD:Z87X-UD5H /4770K

        Comment

        • #5
          Re: New rig issue

          I've reseted them...nothing.. :(

          The thing is to make the graphics card to work...

          Its a MS Gaming Keyboard and the Razer Naga MMO Mouse, both USB...
          The issue is more like the card. I'm plugging it and nothing works...doesnt boot up neither i hear that Beep sound. When i remove it and use the OnBoard GFX card, i can hear the beep and everything.

          I tried using my other GFX card, the previous one, and it worked. It's more like the card i think...
          Last edited by gmaister22; 10-21-2012, 08:16 AM.

          Comment

          • #6
            Re: New rig issue

            Hopefully someone with experience with your board will check this thread. All I can say about the graphics card is try different settings in the BIOS. On my boards I've never had to change from Auto but maybe for your card you might have to.
            But like I said, if the KB doesn't work you can't change anything. Better try to find a KB that works.
            Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
            Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
            PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
            Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
            Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me

             Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
            HTPC: Z68 Pro3 M / 2105
            SOLD:Z97X-UD5H /4790K/F11b mod BIOS/[email protected] 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
            SOLD:Z87X-UD5H /4770K

            Comment

            • #7
              Re: New rig issue

              Telling us that you have a 600 watt psu doesn't mean anything!
              If it's an el cheapo model, it might be part of the problem.
              We need detailed information about all of your hardware.
              Look at boondocks' PC Specs and you'll find all the information we might need.

              We can best help you after you create a detailed hardware list in the PC Specs portion of your
              forum profile http://forums.tweaktown.com/profile.php?do=editprofile at the bottom of the
              profile page or in your forum signature http://forums.tweaktown.com/profile....=editsignature.
              Be sure to include brand names and model numbers.
              Q9650 @ 4.10GHz [9x456MHz]
              P35-DS4 [rev: 2.0] ~ Bios: F14
              4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
              MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
              Seasonic SS-660XP2 80 Plus Platinum psu (660w)
              WD Caviar Black WD6401AALS 640GB (data)
              Samsung 840 Pro 256GB SSD (boot)
              SLI @ 16/4 works when running HyperSLI              		 Cooler Master 120XL Seidon push/pull AIO cpu water cooling
              Cooler Master HAF XB computer case (RC-902XB-KKN1)
              Asus VH242H 24" monitor [1920x1080]
              MSI N460GTX Hawk (1GB) video card
              Logitech Z-5500 Digital 5.1 Speakers
              win7 x64 sp1 Home Premium
              HT|Omega Claro plus+ sound card
              CyberPower CP1500PFCLCD UPS
              E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
              Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
              Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
              HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
              win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S              .

              Comment

              • #8
                Re: New rig issue

                Originally posted by gmaister22 View Post
                Hey guys,

                I just bought a new setup:

                Intel i7 3770K
                Gigabyte GA-Z77X-UD3H
                MSI GTX 660 TFZ
                8GB corsair vengeance 1600

                I've connected them all correctly... there mobo has a panel for debugging, and it says: "97" which means:"Console Output devices connect (ex. Monitor is lighted)"

                i tried to remove the GFX card and to use the onboard. It worked. I tried to install windows, but the keyboard and the mouse is not working on the installation process...

                Not sure what's going on wrong here...the gfx card should work just fine....any ideas? :( It's driving me crazy
                I had the same problem, I hope you solved it since this thread is a week old, but I didn't see you post a solution.

                The problem is that the bios shipped with the GA-Z77X-UD3H probably needs to be updated for the new GPU to work. My Z77X-UD5H came with bios F7 which didn't work. Same issue as you are having. I had it working easily with my old PCIE 2.1 card an ATI HD5770 but the MSI TF III 660GTX gave code 97 and sat there.

                I thought it may be the ATX4P connector which is supposed to provide power for PCI-E cards but it wasn't, you only need that connected for 2 or more cards.

                After I upgrade to F14 the card works, but I lost use of my combo/key/mouse in bios. Not as big a deal as the card not working at all, I hope they fix that in a newer firmware...

                Comment

                • #9
                  Re: New rig issue

                  I made an account just to answer this. I had the same exact problem 100% when I built my new rig. This needs to be here for people to see because I was panicking when this happened to me. Thinking I may have broken something.
                  In order for the video card(s) to be picked up, you must first boot into windows using the integrated GPU without the cards installed. Run a bios update to get everything up to the newest version, then shut down. Install the card(s) then and boot up. You should get past post now.

                  The board was unable to see the cards and needed a bios update before it could recognize the video system.

                  Comment

                  • #10
                    Re: New rig issue

                    +1

                    seen same issue fixed with a bios update over on another forum

                    trying the latest f19j beta bios might help with your kb/mouse issue as might trying other usb ports at the back

                    Z77XUD3H.19j.zip f19j beta
                    Gigabyte z77x UP4-TH F11c Modded Bios
                    Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
                    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
                    Thermalright Silver Arrow Cpu Cooler
                    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
                    1xSamsung f4 HD204UI 2tb hard drive Storage
                    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
                    Razer Lycosa Keyboard
                    Logitech X-530 5.1 Speakers
                    Lite-On iHAS124-19 24x Sata DVDRW
                    K-World Hybrid DVB-T 210SE Digital T.V Card
                    L.G E2260V L.E.D 1920x1080 Monitor
                    Xfx Pro 750w silver rated Psu 80+
                    Fractal Arc Midi Case

                    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
                    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

                    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
                    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

                    Comment

                    Previous template Next
                    Working...
                    X