G'day all, have posted a few questions re inability to burn CD's - I think the pagefile size may be the culprit.
If i go to System Properties/Performance/Advanced it tells me the page file for all drives is set at 384 MB.
Click on "Change" and gives me the following info.
Drive "C" has 2330 mb available.
the "Custom" circle is checked.
Initial size set at 384.
Maximum size set at 768.
Below that is the following;
minimum allowed 2 mb.
recommended 574 mb.
currently allocated 384 mb.
I have a 1 gb partition on my 2nd hard drive I used to use as a swapfile with 98SE which is currently unused.
What and how should I set the pagefile too? Thanks gents
If i go to System Properties/Performance/Advanced it tells me the page file for all drives is set at 384 MB.
Click on "Change" and gives me the following info.
Drive "C" has 2330 mb available.
the "Custom" circle is checked.
Initial size set at 384.
Maximum size set at 768.
Below that is the following;
minimum allowed 2 mb.
recommended 574 mb.
currently allocated 384 mb.
I have a 1 gb partition on my 2nd hard drive I used to use as a swapfile with 98SE which is currently unused.
What and how should I set the pagefile too? Thanks gents
Comment