Hello forum! Im new here. I hope everything is good with you all.
The problem: I turn on the PC this morning and it stayed on the BIOS logo screen frozen. It wont turn off holding the power button so I unpluggled it. Waited a couple seconds and turned it on again and it would turn on for a few seconds and then turn off. When it turns on the BIOS splash wont come on. I disassembled the PC and removed the SSD and 2 HDD, the issue persist as described. Removed the GPU and same issue. Removed the RAM and same issue. Removed the CPU and same issue. Removed the CMOS battery for a couple minutes and reinserted it and tried turning it on and it wont even turn on. No BIOS beeps no nothing. I think it could be a bad MB but im not sure. PLEASE HELP ME!!!
If you need further details, please let me know
EDIT 1: I did the PSU test from a you tube video inserting a paper clip on the green and adjacent black cable along with 2 120mm fans to have some load and the PSU will turn on....
At this point it I think is the board :(... If I change the board that means a full OS install right? unless I can get the same board RMA'd... THanks for looking!!
The problem: I turn on the PC this morning and it stayed on the BIOS logo screen frozen. It wont turn off holding the power button so I unpluggled it. Waited a couple seconds and turned it on again and it would turn on for a few seconds and then turn off. When it turns on the BIOS splash wont come on. I disassembled the PC and removed the SSD and 2 HDD, the issue persist as described. Removed the GPU and same issue. Removed the RAM and same issue. Removed the CPU and same issue. Removed the CMOS battery for a couple minutes and reinserted it and tried turning it on and it wont even turn on. No BIOS beeps no nothing. I think it could be a bad MB but im not sure. PLEASE HELP ME!!!
If you need further details, please let me know
EDIT 1: I did the PSU test from a you tube video inserting a paper clip on the green and adjacent black cable along with 2 120mm fans to have some load and the PSU will turn on....
At this point it I think is the board :(... If I change the board that means a full OS install right? unless I can get the same board RMA'd... THanks for looking!!
Comment