NVIDIA GT-610 and ASROCK H61M-VG3 not VGA signal.

[nelta2002uy]

Hello again. When i connect NVIDIA GT-610 on slot PCI-e, the monitor not work, but its works when i connect to OnBoard VGA.

The video card works, and I set Bios:
PCI-E primary, and nothing,
also set ON BOARD VGA primary, and nothing.

This card (nvidia) not use 6 pin cable. and it is PCI-E 2.0

can you help me? Thanks

[ASRock TSD - Emily]

Re: NVIDIA GT-610 and ASROCK H61M-VG3 not VGA signal.

Dear nelta2002uy,

Please refer to below suggestions to try.
1. Update the latest BIOS P1.90 from below link and load BIOS default settings to try.
Link: ASRock > H61M-VG3
2. Re-install the VGA card to try.
3. If possible, please test the VGA card to another system to check if the card is fine.
4. If possible, please test another VGA card on PCI-E slot to check if system boot from PCI-E slot.

Thanks!

Have a nice day
ASRock TSD
Emily