Hello !
Could you please help me?
I would like to ask for help with some settings
Currently I'm running a 771 ghetto modded X5460 in a P45 board.
I have 4 sticks of Kingmax FLGE85F-B8MF7 MEEH 2GB RAM moduls.
I can't find a techspec for them but the boxing says:
DDR III 1600 Mhz 7-7-7 CL7 @ 1.5-1.8v 12.8GB/s
My goal is 9.5x400 (3800Mhz) with 1600 DRAM freq.
I don't want to hit the CPU too hard couse i want to use for the next few years
Yea' I know "It's 2014 MAN!" but i simply dont have the money for a whole new rig.
The problem is that i can't reach 1600 DRAM
Tried leaving everything at auto tried to set defaults manually.I've tried several other timings, voltage settings but still nothing.
I removed 2 of the modules and still nothing
Tried to raise MCH Core to the sky, even tried lowering it.
If CPU Host is at 400 and DRAM is at 1.8v it wont even POST!
the board should be capable of 2200+ FSB
now its running at a pathetic 1520Mhz w/ 9-9-9-24 timings at 1.9v !
SUPER SLOW
Any advice?
Thank you
below are the current settings:
BIOS:
I think if I can't get this working i'll need to get rid of these sticks and get a pair of G.SKILLs (F3-12800CL8D-8GBXM - RipjawsX XM | 2x4GB Kit)
May have better luck with them.
Do you think this rig will be able to handle it properly?
Could you please help me?
I would like to ask for help with some settings
Currently I'm running a 771 ghetto modded X5460 in a P45 board.
I have 4 sticks of Kingmax FLGE85F-B8MF7 MEEH 2GB RAM moduls.
I can't find a techspec for them but the boxing says:
DDR III 1600 Mhz 7-7-7 CL7 @ 1.5-1.8v 12.8GB/s
My goal is 9.5x400 (3800Mhz) with 1600 DRAM freq.
I don't want to hit the CPU too hard couse i want to use for the next few years
Yea' I know "It's 2014 MAN!" but i simply dont have the money for a whole new rig.
The problem is that i can't reach 1600 DRAM
Tried leaving everything at auto tried to set defaults manually.I've tried several other timings, voltage settings but still nothing.
I removed 2 of the modules and still nothing
Tried to raise MCH Core to the sky, even tried lowering it.
If CPU Host is at 400 and DRAM is at 1.8v it wont even POST!
the board should be capable of 2200+ FSB
now its running at a pathetic 1520Mhz w/ 9-9-9-24 timings at 1.9v !
SUPER SLOW
Any advice?
Thank you
below are the current settings:
BIOS:
Code:
Motherboard: EP-45T-UD3LR Rev#: Bios Version: F10Cpu: Intel Xeon X5460 Ram: Kingston, FLGE85F B8MF7 MEEH Power Supply Unit: FSP, HE-500, 500W MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster -------- : [Auto] CPU Clock Ratio ---------------- : [x9] Fine CPU Clock Ratio ----------- : [0.5] CPU Frequency -------------- : 3.61 Ghz (9.5x380) Clock Chip Control Standard Clock Control CPU Host Clock Control --------- : [Enabled] CPU Host Frequency (Mhz) ------- : [380Mhz] PCI Express Frequency (Mhz) ---- : [100] C.I.A.2 ------------------------ : [Disabled] Advanced Clock Control ------- [Press Enter] CPU Clock Drive ---------------- : 800mV PCI Express Clock Drive -------- : 800mV CPU Clock Skew (ps) ------------ : 0ps MCH Clock Skew (ps) ------------ : 0ps DRAM Performance Control Performance Enhance ------------ : [Standard] Extreme Memory Profile - (XMP) - : [Disabled] (G)MCH Frequency Latch --------- : [Auto] System Memory Multiplier ------- : [Auto] Memory Frequency (Mhz) --------- : [1520] DRAM Timing Selectable --------- : [Manual] Standard Timing Control CAS Latency Time ------- 9 ---- : [9] tRCD ------------------ 9 ---- : [9] tRP -------------------- 9 ---- : [9] tRAS ------------------ 24 ---- : [24] Motherboard Voltage Control CPU Voltage Types--------- Normal ----- Current ----- Load-Line Calibration ---------- : [Disabled] CPU Vcore ----------- 1.25000 -- : [1.30000] CPU Termination ----- 1.200V* -- : [1.220] CPU PLL ------------- 1.550V* -- : [1.550] CPU Reference ------- 0.805V* -- : [Auto] MCH/ICH MCH Core ------------- 1.100V -- : [1.240] MCH Reference -------- 0.800V -- : [Auto] ICH I/O -------------- 1.550V -- : [1.550] ICH Core ------------- 1.100V -- : [1.100] DRAM [B]DRAM Voltage --------- 1.800V -- : [1.900] !!!!!!!!!!!!![/B] DRAM Termination ----- 0.900V -- : [Auto] Channel A Reference -- 0.900V -- : [Auto] Channel B Reference -- 0.900V -- : [Auto] Advanced Settings Limit CPUID Max. to 3 ---------- : [Disabled] No-Execute Memory Protect ------ : [Enabled] CPU Enhanced Halt (C1E) -------- : [Disabled] C2/C2E State Support ----------- : [Disabled] x C4/C4E State Support --------- : [Disabled] CPU Thermal Monitor 2 (TM2) ---- : [Enabled] CPU EIST Function ------------- : [Disabled] Virtualization Technology ------ : [Disabled] Integrated Peripherals Legacy USB Storage Detect ----- : [Enabled]
May have better luck with them.
Do you think this rig will be able to handle it properly?
Comment