Hello all,
I've finished overclocking my new system and now have settled for 4.5GHz which is rock stable.
My settings are as follows:
(BIOS Ver 1902)
AI Tweaker:
AI overclock Tuner = Xmp
BCLK Freq = 100.00
ASUS Multicore Enhancement = Auto
CPU Core Ratio = Sync all Cores
1-Core Ratio = 45
DDR Freq = DDR4-2400 MHz
TPU = Keep Current
AI Tweaker/DIGI+ VRM:
CPU Load-Line Calibration = Level 6
CPU Power Phase Control = Optimised
AI Tweaker:
CPU Core/Cache Current Limit Max = 255.50
Min Cache Ratio = 45
Max Cache Ratio = 45
CPU Core/Cache Voltage = Manual Mode
- CPU Core Voltage Override = 1.260
All other values are set = Default or Auto
Real Temp GT 3.70 used to record temps.
Idle temps are 21 - 24
Full load temps of 68 - 71 while running P95 v28.9 build 2 for over 5 hours using the following to achieve maximum heat production:
Set the Min FFT and Max FFT size to 8 and checked Run FFTs in-place. Also set 15 minutes to run each FFT. Ref
Tested the stability of my overclock by using the following settings which was over 9 hours (while I was at work):
Set the Min FFT and Max FFT size to 1344 and checked Run FFTs in-place. Also set 15 minutes to run each FFT. Ref
I welcome any and all advice you may have in regards to the above and some help in overclocking my RAM.
cheers
worf105 <!-- / message --><!-- edit note --><strike></strike>
I've finished overclocking my new system and now have settled for 4.5GHz which is rock stable.
My settings are as follows:
(BIOS Ver 1902)
AI Tweaker:
AI overclock Tuner = Xmp
BCLK Freq = 100.00
ASUS Multicore Enhancement = Auto
CPU Core Ratio = Sync all Cores
1-Core Ratio = 45
DDR Freq = DDR4-2400 MHz
TPU = Keep Current
AI Tweaker/DIGI+ VRM:
CPU Load-Line Calibration = Level 6
CPU Power Phase Control = Optimised
AI Tweaker:
CPU Core/Cache Current Limit Max = 255.50
Min Cache Ratio = 45
Max Cache Ratio = 45
CPU Core/Cache Voltage = Manual Mode
- CPU Core Voltage Override = 1.260
All other values are set = Default or Auto
Real Temp GT 3.70 used to record temps.
Idle temps are 21 - 24
Full load temps of 68 - 71 while running P95 v28.9 build 2 for over 5 hours using the following to achieve maximum heat production:
Set the Min FFT and Max FFT size to 8 and checked Run FFTs in-place. Also set 15 minutes to run each FFT. Ref
Tested the stability of my overclock by using the following settings which was over 9 hours (while I was at work):
Set the Min FFT and Max FFT size to 1344 and checked Run FFTs in-place. Also set 15 minutes to run each FFT. Ref
I welcome any and all advice you may have in regards to the above and some help in overclocking my RAM.
cheers
worf105 <!-- / message --><!-- edit note --><strike></strike>