No announcement yet.

x5460 in 2019

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • x5460 in 2019

    Click image for larger version

Name:	12.jpg
Views:	1
Size:	156.1 KB
ID:	756497 Hello to all! I am writing from Russia! I have a x5460 processor and above 3.8 I can not overclock as I have no experience! masters of the forum and experienced overclockers please help
    Last edited by myrashka; 07-07-2019, 05:17 AM.

  • #2
    Re: x5460 in 2019

    The chipset shown in MemSet is P45 but manual says it's a P43, whic hone is it?

    As far as I recall my P43 board did not boot at above 411MHz, and could have made stable at 406MHz, if it is P43 you at or near it's limit.

    Attach a text report of CPU-Z to your next post, will give a better picture on your setup.
    Last edited by Chike; 07-09-2019, 08:44 PM.

    Comment


    • #3
      Re: x5460 in 2019

      Originally posted by Chike View Post
      The chipset shown in MemSet is P45 but manual says it's a P43, whic hone is it?

      As far as I recall my P43 board did not boot at above 411MHz, and could have made stable at 406MHz, if it is P43 you at or near it's limit.

      Attach a text report of CPU-Z to your next post, will give a better picture on your setup.
      DESKTOP-H595VTU.txt

      Comment


      • #4
        Re: x5460 in 2019

        CPU-Z can't tell either so it must be P43 according to the manual and 3.8GHz is about the maximum you can get.

        I see VIN1 is 1.71v, I am guessing it is the memory voltage, considering the amount of memory you are using and the fact you are mixing 2 different modules it may be a good idea to get t o at least 1.8v.

        As for FSB termination, no default value is shown in BIOS. Manual states it is set to 1.1v when a 45nm processor is installed, and Intel's documentation says it should be 1.1v for this CPU, however for E8000/E7000 CPUs documentation says it should be 1.2v for Intel 4 serieschipsets, and 1.1v for Intel 3 series chipsets (e.g. P35).
        It may be VIN6, try to see with HWiNFO (sensors).

        Comment


        • #5
          Re: x5460 in 2019

          P43 chip set,
          Overclocking depends on the cooler your using for the CPU? Better cooling equals more volts, higher overclocks. ON a good air cooler with good ambient temps, depending on the chip and board you should be able to go around 4Ghz.
          MSI X-99SLI
          Intel 5930K WATER
          EVGA Nilla 1080
          POWER!



          http://www.3dmark.com/3dmv/5003339

          I did this> :) Default RMA discussion banned

          Comment

          Working...
          X