Bios Settings...

[Looper]

Hello fellas. Someone please help me setting up bios in my new system.

NOTE: I just want stock settings (no ocerclocking);)

1) Adv. chipset features:
Dram Timing Setting ?...DRAM Frequency-auto(default) (settings are :SPD,200,266,333MHz,Auto)
Configure SDRAM Timing by SPD? -Enabled(default)
AGP Aperture Size Default set to 64MB(default) (selection of 4, 8, 16, 32, 64, 128, and 256MB)

CAS# Latency? (settings 2,2.5(clocks))
RAS# Precharge? (settings 2clocks, 3 clocks)
RAS# to Cas# delay? (settings 3 clocks, 2 clocks)
Precharge Delay ? (settings 5,6,7 clocks)
Burst Lenght? (settings 4,8)
CPU L1 & L2 Cache?

2) PNP/PCI Configuration

PCI Latency timer (PCI Clocks) 32(default ( settings 32 to 248)


3) Frequency/Voltage Control

Spread Spectrum no(default)
CPU Ratio Selection 8.0x (default)
CPU FSB Clock(MHz) 100 (default)
AGP/PCI clock(MHz) ?
CPU Vcore Adjust No(default)
CPU Vcore 1.550V (default)
DDr Power 2.5V
AGP power 1.5V

My System:
==============================================
MSI 845PE Max2 FIR 533FSB MHz DDR333 4x AGP
Kingmax PC2700 1G 512MB x 2
MSI TI4200 128MB DDR VTD8x
Intel P4 2.4G 533MHz System Bus, 512KB L2 Advaced Transfer Cache
WD 80G 8MB Caviar
==============================================

Sorry for the long post, I need help from Experts;)

Thank You.

[Darthtanion]

You might want to check out Adrian's Rojak Pot for the ir latest BIOS Optimization Guide. They put out one of the best on the net. :)