Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 10 of 10

Thread: AMD 1.2 T-Bird TO 1600+XP Improvement?




  1. #1
    Join Date
    Jun 2002
    Posts
    3

    Default

    Hi, all i'm thinking about switching my trusty ATHLON 1.2GHz T-Brid to a newer 1600+ (1.4GHz) ATHLON XP (I can get one cheap and sell my old t-bird on ebay for about the same price)
    What I would like to know is it worth the hassle will i notice any increase in performance?

    Or a decrease in system temp. (i'm running a bit hot now 56C at full load)

  2. #2
    Join Date
    Dec 2001
    Posts
    1,297

    Default

    Depends on what you do. Stuff like e-mail, word processing, etc. I doubt it. Depending on your graphics card, you may get a little bit of a boost in gaming. Most likely you'll only be able to tell with benchmarks.

  3. #3
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    I'd be checkin' out ya case ventilation and HSF as that temp is too high (unless it's an Asus board which normally records inflated temps). A bit more detail about ya setup would helpful too as some mobo's won't work with an Athlon XP and others will need a BIOS flash to work. Also is your T'bird a 200MHz or 266MHz FSB model? :smokin:
    <center>:cheers:</center>

  4. #4

    Default

    Yep difinitely check your mobo out for compatibility with the XP processors. KT133's are obviously a no go, many (particularly earlier revision) KT133A's also won't even post with an XP in there. VIA's early revisions of the KT133A lacked the support for the Palomino core.
    My Box:
    Intel Pentium 4 2.4C @ 2.7
    DFI 875P Lanparty
    512Mb Geil PC3500 Dual Channel (Cas 2-6-3-3 @450MHz DDR)
    Leadtek A280 Geforce4 4200 MyVIVO
    Audigy DE
    1 x 73Gb Seagate fibre channel 10krpm (boot drive) with LSI HBA
    1x80Gig Seagate Barracuda ATA V
    1x120Gig Western Digital 8mb cache
    Spiffy Antec Super Lanboy (LED fan and UV light)

  5. #5
    Join Date
    Jun 2002
    Posts
    3

    Default

    I have an Aurora Gigabyte 7DX Mobo on a 200MHz FSB

    I've check the mother board specs and it supports up to a 1900+ XP (I have the latest bios)

  6. #6
    Join Date
    Jun 2002
    Posts
    3

    Default

    As far as the temp. is concerned I have 2 case fans one for intake (Back) one for input (front) and the CPU is cooled by a ohh I forgot whta's it's called (but its a good HSF combo not a chipo one =)

    I think the heat is due to the fact that it used to be somewhere around 45C when i first installed the HSF but since then i've been moving my computer around quite a bit and the HSF must have budged off the spot i'll be reinstalling the HSF soon (but i'm just to lazy right now)

    Does't the ATHLON XP use less power?...hence would put out less heat?

  7. #7
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    Voltages are the same for both CPU's though the XP's disapate slightly less heat then the older version, 66watts for the 1.2GHz and 63 watts for the XP 1600+ if I remember rightly. I've just checked the specs of your board and with the latest BIOS it will support the new "Thoroughbred" 2200+ though no overclocking is supported for 266MHz FSB processors but 200MHz FSB CPU's can be overclocked to some extent. :smokin:
    <center>:cheers:</center>

  8. #8

    Default

    Speaking of....I'm running an Athlon TB 1.4GHz 266MHz FSB with the KT266A NorthBridge. Have I gotten to that point that I would not notice an improvement in anything except for benchamarks and games? I have a geforce 3 so I feel I'm not gonna notice an improvement in say quake 3 but Doom 3 I KNOW I will see something. I'm talking if I were to upgrade to say an 1800-2200.

  9. #9
    Join Date
    Nov 2001
    Posts
    1,599

    Default

    Well, think about this RD, by the time Doom3 comes out, ponder what you will be able to get for the current cost of a XP2000... I'm betting at least an XP2400, if not XP2600.

    My point is, if you won't see an improvement now, wait, because everything will be worth less in 6 -8 months.

  10. #10
    Join Date
    May 2002
    Posts
    2,489

    Default

    I agree with Zeradul on that one ...whats the point if you are not going to notice a major thing...The idea behind building a new rig is to satisfy your needs and improve from what you had before. I think i made a major improvement jumping from a 933 p3 to xp2000 w/ raid etc...SoOoO have patients....yesterday i held off on buying a new 17" monitor and today my boss was throwing one out!...i grabbed that bad boy and bam new montor...: peace2:
    - Damien

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •