Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 6 FirstFirst 1234 ... LastLast
Results 11 to 20 of 54

Thread: Overclocking Intel Dual Core E5200




  1. #11
    Join Date
    Aug 2009
    Posts
    13

    Default Re: Overclocking Intel Dual Core E5200

    Quote Originally Posted by Lsdmeasap View Post
    Are you maybe choosing 3.33D for the memory multiplier? You need to use 3.33A
    Latch was set to 200Mhz so there is only "A" avaible in memory multiplier.


    marko, don't forget to change RAM timings and volts to your own.
    Last edited by Defined; 08-20-2009 at 01:57 AM.

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking Intel Dual Core E5200

    I overlooked that, used to using Auto myself and picking. Thanks for giving me the heads up.

  3. #13
    Join Date
    Aug 2009
    Posts
    42

    Default Re: Overclocking Intel Dual Core E5200

    MB Inteligent Tweaker (M.I.T.)

    Bobust Graphic Booster . . . . . Auto
    CPU Clock Ratio . . . . . . . . . . 12 X
    Fine CPU Clock Ratio . . . . . . . +0.5
    CPU Frequency 3.00GHz( 240x12.5)

    Clock Chip Control

    Standard Clock Control

    CPU Host Clock Control . . . . . Enabled
    CPU Host Frequency(Mhz) . . . 240
    PCI Express Frequency(Mhz). . 100
    C.I.A.2 . . . . . . . . . . . . . . . . Disabled

    Advanced Clock Control


    CPU Clock Drive . . . . . . . . . . 800mV
    PCI Express Clock Drive . . . . . 900mV
    CPU Clock Skew . . . . . . . . . . 0ps
    MCH Clock Skew . . . . . . . . . . 0ps

    DRAM Performance Control

    Performance Enhance . . . . . . . . . . . Standard
    (G)MCH Frequency Latch . . . . . . . . . 200Mhz
    System Memory Multiplier (SPD) . . . . . 3.33C
    Memory Frequency(Mhz) 800 . . . . . . . 800
    DRAM Timing Selectable (SPD) . . . . . . Manual

    Standard Timing Control
    CAS Latency Time 5 . . . . . Auto
    tRCD 5 . . . . . . . . . . . . . . Auto
    tRP 5 . . . . . . . . . . . . . . . Auto
    tRAS 18 . . . . . . . . . . . . . Auto

    Advanced Timing Control

    tRRD 3 . . . . . . . . . . . . . . . . Auto
    tWTR 3 . . . . . . . . . . . . . . . Auto
    tWR 6 . . . . . . . . . . . . . . . . Auto
    tRFC 52 . . . . . . . . . . . . . . . Auto
    tRTP 3 . . . . . . . . . . . . . . . . Auto
    Command Rate(CMD) 0 . . . . . 2

    Channel A . . . . . All Auto
    Channel B . . . . . All Auto

    Mother Board Voltage Control

    CPU

    CPU Vcore . . . . . . . . . 1.26875V
    CPU Termination . . . . . 1.200V
    CPU PLL . . . . . . . . . . . 1.500V
    CPU Reference . . . . . . . Auto

    MCH/ICH

    MCH Core . . . . . . . . . . . . . 1.180V
    MCH Reference . . . . . . . . . Auto
    MCH/DRAM REference . . . . . Auto
    ICH I/O . . . . . . . . . . . . . . . Auto

  4. #14
    Join Date
    Aug 2009
    Posts
    42

    Default Re: Overclocking Intel Dual Core E5200

    And I missed DRAM:

    DRAM Voltage . . . . . . . . . . 1.800V
    DRAM Termination . . . . . . . Auto
    Channel A Reference . . . . . Auto
    Channel B Reference . . . . . Auto

  5. #15
    Join Date
    Aug 2009
    Posts
    42

    Default Re: Overclocking Intel Dual Core E5200

    Quote Originally Posted by Defined View Post
    Latch was set to 200Mhz so there is only "A" avaible in memory multiplier.


    marko, don't forget to change RAM timings and volts to your own.


    C is only avaliable to me when latch is 200Mhz

  6. #16
    Join Date
    Aug 2009
    Posts
    13

    Default Re: Overclocking Intel Dual Core E5200

    Hmm.. this should work:

    DRAM Performance Control
    Performance Enhance . . . . . . . . . . . Standard
    (G)MCH Frequency Latch . . . . . . . . . Auto
    System Memory Multiplier (SPD) . . . . .3.33C <<<<<<<< Use C
    Memory Frequency(Mhz) 800 . . . . . . . 800
    DRAM Timing Selectable (SPD) . . . . . . Manual

    Standard Timing Control
    CAS Latency Time 5 . . . . . 5
    tRCD 5 . . . . . . . . . . . . . . 5
    tRP 5 . . . . . . . . . . . . . . . 5
    tRAS 18 . . . . . . . . . . . . . 18

    Advanced Timing Control

    tRRD 3 . . . . . . . . . . . . . . . . Auto
    tWTR 3 . . . . . . . . . . . . . . . Auto
    tWR 6 . . . . . . . . . . . . . . . . Auto
    tRFC 52 . . . . . . . . . . . . . . . Auto
    tRTP 3 . . . . . . . . . . . . . . . . Auto
    Command Rate(CMD) 0 . . . . . Auto

    Channel A . . . . . << Static tRead 8
    Channel B . . . . . << Static tRead 8

    Mother Board Voltage ControlCPU

    CPU Vcore . . . . . . . . . 1.26875V
    CPU Termination . . . . . 1.220V
    CPU PLL . . . . . . . . . . . 1.500V
    CPU Reference . . . . . . . Auto

    MCH/ICH

    MCH Core . . . . . . . . . . . . . 1.240V
    MCH Reference . . . . . . . . . Auto
    MCH/DRAM REference . . . . . Auto
    ICH I/O . . . . . . . . . . . . . . . Auto
    Last edited by Defined; 08-20-2009 at 02:33 AM.

  7. #17
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking Intel Dual Core E5200

    Ahh looks like we both missed the larger mistake in what I said Defined, should be 3.33C and not 3.33A as there is no 3.33A

    Try more Vtt (CPU Termination) and then also add a screenshot of Memset so we can see what all those Auto's are giving you. Memset can be downloaded here >>
    Tweakers.fr

  8. #18
    Join Date
    Aug 2009
    Posts
    42

    Default Re: Overclocking Intel Dual Core E5200

    when I set frequency latch to auto i can ony select 2.00A,2.50A,3.00A and 4.00A but not the 3.33A

  9. #19
    Join Date
    Aug 2009
    Posts
    13

    Default Re: Overclocking Intel Dual Core E5200

    use 3.33C, i just edited mah post..

  10. #20
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking Intel Dual Core E5200

    Sorry for the confusion guys!!

    Here is the available multipliers per strap to alleviate further confusion >>


Page 2 of 6 FirstFirst 1234 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •