Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 6 123 ... LastLast
Results 1 to 10 of 54

Thread: Overclocking Intel Dual Core E5200




  1. #1
    Join Date
    Aug 2009
    Posts
    42

    Default Overclocking Intel Dual Core E5200

    Hi, guys ...

    This is my first post ... :)

    Now ... I have Intel E5200 processor and my motherboard is Gigabyte EP43-DS3 ...

    I want to overclock it to 3.00 Ghz (It's currently 2.50 Ghz) , so could someone please give me BIOS settings for overclocking this processor to 3.00 Ghz , because I tried many combinations and system failed to boot ... so any help would be appriciated :)

  2. #2
    Join Date
    Aug 2009
    Posts
    42

    Default Re: Overclocking Intel Dual Core E5200

    And also If u need my system specs :

    Gigabyte EP43-DS3
    Intel Dual Core E5200 @ 2.50 Ghz
    2x2GB RAM Kingmax 800Mhz
    Gigabyte Radeon HD 4870 1GB
    Blue Storm II 500W

  3. #3
    Join Date
    Aug 2009
    Posts
    13

    Default Re: Overclocking Intel Dual Core E5200

    Hi, here is mine settings:

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 12
    Fine CPU Clock Ratio.....................:.5
    CPU Frequency ...........................: 3.0 Ghz
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: 240 Mhz
    PCI Express Frequency (Mhz) .........: 100Mhz
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [Extreme] << Maybe use STANDARD first
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [200Mhz]
    System Memory Multiplier ..............: 3.33
    Memory Frequency (Mhz) ..............: 800Mhz
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control << Use your own RAM timings
    CAS Latency Time........................ 6
    tRCD ......................................... 6
    tRP'........................................... 6
    tRAS.......................................... 18
    
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
    
    Advanced Timing Control
    tRRD........................................... Auto
    tWTR.......................................... Auto
    tWR............................................ Auto
    tRFC........................................... Auto
    tRTP........................................... Auto
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................ Auto
    
    Channel A
    Static tRead Value.........................: Auto
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:Auto
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    
    CPU
    CPU Vcore….……….........................:1.2650V if not overclocking, if you are overclocking please do find and set your own voltages
    
    CPU Termination…..... 1.200V*.......: 1.200V << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore.  Auto is fine if not overclocking
    
    CPU PLL…………………....1.500V*.......: 1.500V << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.5-1.65.  Auto is fine if not overclocking
    
    CPU Referen.…………....0.755V*.......: Auto <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......: Auto <<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: 1.180V << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.500V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 1.800V << use your ram rated voltage
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Disabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
    System:
    Intel E5200
    EP43-DS3
    A-DATA DDR2-800Mhz CL6
    GIGABYTE HD4850

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking Intel Dual Core E5200

    I also just posted settings for a user here with E5300 for 3.33Ghz, so that may help you as well >>
    http://forums.tweaktown.com/f13/over...-needed-33739/

    If you need more help post back anytime

  5. #5
    Join Date
    Aug 2009
    Posts
    42

    Default Re: Overclocking Intel Dual Core E5200

    Thanks guys, im gonna try this right away :)

  6. #6
    Join Date
    Aug 2009
    Posts
    42

    Default Re: Overclocking Intel Dual Core E5200

    IM still failing to boot windows even after settings u gave me :(

  7. #7
    Join Date
    Aug 2009
    Posts
    42

    Default Re: Overclocking Intel Dual Core E5200

    Is it normal when I fail my monitor dont want to turn on only when I revert my settings to normal

  8. #8
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking Intel Dual Core E5200

    Yes, that could be normal with your monitor when settings are off

    Please post in full the settings you are trying that fail and we will advise back

  9. #9
    Join Date
    Aug 2009
    Posts
    42

    Default Re: Overclocking Intel Dual Core E5200

    I tried settings that "Defined" posted an I still fail , but I don't know why I fail every time I do that exactly as it is written and I stil fail ... :(

    Any help on them ?

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking Intel Dual Core E5200

    I would still ask you post your exact settings, just to be sure nothing differs. Please don't copy his, in case there is something you are missing. That's why we ask you to always post your own.

    Are you maybe choosing 3.33D for the memory multiplier? You need to use 3.33A Please ignore, there is no 3.33A

    Also I would set 1.24 MCH for now, and manually set Static tRead value to 8 for now as well. Set your own Vtt too
    Last edited by Lsdmeasap; 08-20-2009 at 02:41 AM.

Page 1 of 6 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •