Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: E5200 + ga-ep45t-ud3p




  1. #1
    Join Date
    Sep 2009
    Posts
    3

    Default E5200 + ga-ep45t-ud3p

    Hi I'm new both here and to overclocking in general and I'd like to know if I can use the settings in this thread minus ram the stuff as a template??? I'd like to achieve 3.0ghz if possible and any help would be greatly appreciated.

    -Thanks in advance,
    ICCEE

  2. #2
    Join Date
    Sep 2009
    Posts
    3

    Default Re: E5200 + ga-ep45t-ud3p

    Oh yeah here's my ram info:

    Manufacturer : STT
    Part Number : Unspecified
    Serial Number : 0012D7E04D2C6812
    Specification : H
    Type : DDR3-SDRAM PC3-10700 (667 MHz) - [DDR3-1333]
    Format : UDIMM (133.35 x 0)
    Size : 2048 MB (2 ranks, 8 banks)
    Module Buffered : No
    Module Registered : No
    Module SLi Ready (EPP) : No
    Module XMP : Yes
    Width : 0-bit
    Error Correction Capability : Unspecified
    Refresh :
    Voltage :
    Prefetch Buffer : 8-bit
    Manufacture : 2000
    Supported Frequencies : 444 MHz, 518 MHz, 592 MHz, 666 MHz, 740 MHz
    CAS Latency (tCL) : 6 clocks @444 MHz, 7 clocks @518 MHz, 8 clocks @592 MHz, 9 clocks @666 MHz, 10 clocks @740 MHz
    RAS to CAS (tRCD) : 6 clocks @444 MHz, 7 clocks @518 MHz, 8 clocks @592 MHz, 9 clocks @666 MHz, 10 clocks @740 MHz
    RAS Precharge (tRP) : 6 clocks @444 MHz, 7 clocks @518 MHz, 8 clocks @592 MHz, 9 clocks @666 MHz, 10 clocks @740 MHz
    Cycle Time (tRAS) : 16 clocks @444 MHz, 19 clocks @518 MHz, 22 clocks @592 MHz, 24 clocks @666 MHz, 27 clocks @740 MHz
    Min TRC : 22 clocks @444 MHz, 26 clocks @518 MHz, 30 clocks @592 MHz, 33 clocks @666 MHz, 37 clocks @740 MHz



    And my CPU info:

    General Information :
    Multiplier : 6x
    Low/High Multiplier : 6x / 12.5x
    Multiplier Locked : Yes
    Marketing Frequency : 2500 MHz

    Front Side Bus Information :
    Bus Speed : 200 MHz
    FSB Frequency : 800.1 MHz (QDR)

    Initial Frequencies :
    Frequency : 2500 MHz
    Bus Speed : 200.00 MHz (QDR)
    Multiplier : 12.5x

    Frequency Control :
    Core #1 : 1200.04 MHz
    Core #2 : 2500.24 MHz

    Control Clock Frequency :
    Enhanced SpeedStep (EIST) : Yes - Enabled
    C1E - Enhanced Halt Mode : No
    Dynamic FSB : Yes - Disabled
    Dynamic Acceleration (IDA) : No

    Thermal Information :
    Thermal Design Power : 65 W
    Core Power : 65.01 W (estimated)
    Resistance : 0.46 °C/W (estimated)
    Thermal control TM1 : Yes - Enabled
    Thermal control TM2 : Yes - Enabled
    Thermal Control Circuit : Yes
    Digital Thermal Sensor : Yes
    Clock Modulation (ODCM) En... No

    Processor Performance Information :
    Throttle Mode AC : None
    Throttle Mode DC : None
    Current Configuration : None
    Throttle : 2499 MHz

    Processor Power Management Information :
    Processor Throttling : Yes
    Throttle Range : 12% - 100%
    Active Power Scheme : Always On

  3. #3
    Join Date
    Aug 2009
    Posts
    13

    Default Re: E5200 + ga-ep45t-ud3p

    yes you can


  4. #4
    Join Date
    May 2009
    Posts
    6

    Default Re: E5200 + ga-ep45t-ud3p

    I hit 3.33 easy.

    I'm using corsair XMS memory that is kinda disappointing.
    All I did to hit 3.33

    General Information :
    Multiplier : 6x
    Low/High Multiplier : 6x / 12.5x
    Multiplier Locked : Yes
    Marketing Frequency : 2500 MHz

    Front Side Bus Information :
    Bus Speed : 200 MHz (CHANGED TO 266)
    FSB Frequency : 800.1 MHz (QDR) (This became 1000)

    Initial Frequencies :
    Frequency : 2500 MHz
    Bus Speed : 200.00 MHz (QDR) (I also changed the ram to 266 and everything seems to work fine)
    Multiplier : 12.5x

    Control Clock Frequency :
    Enhanced SpeedStep (EIST) : Yes - Enabled (TURN THIS OFF for overclocking)
    C1E - Enhanced Halt Mode : No
    Dynamic FSB : Yes - Disabled
    Dynamic Acceleration (IDA) : No


    What I'd really like to do is be able to hit 3.5 or more. This board and ram is supposed to hit 333FSB easy, and that would make 3.75MHZ!!!

    Anyone had experience overclocking e5200 on this DDR board please POST!!!! I'm hapy but, I'm ready to move up to the next step.


    ICCEE if you're still having problems post back, and I can POST my exact settings so you can at least get 3.33, but we should be able to get more

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  6. #6
    Join Date
    May 2009
    Posts
    6

    Default Re: E5200 + ga-ep45t-ud3p

    ALRIGHTY!!!

    Got my e5200 to go 3.75 @300 FSB!!! which is, in my mind, AMAZING! Will see how stable it is in the longrun. I was never able to get to 333 FSB like other posters have but, I'm happy where I am for now.

    I used these settings initially, then booted, and cranked up the multiplier in .5 increments until I hit 3.75. I did have to bump my voltage to 1.36, it would post before 1.36 but would blue screen at startup.

    <style type="text/css"> <!-- @page { margin: 0.79in } P { margin-bottom: 0.08in } --> </style> MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 10X << Set to x10 (then I kicked it up a notch until I hit 12.5)
    Fine CPU Clock Ratio.....................: ?? << this if for some .5 CPU multi's on certain 45nm CPU's
    CPU Frequency ...........................: 3.33 Ghz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: ????? << FSB, set to 300
    PCI Express Frequency (Mhz) .........: ????? << Set to 100

    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mV
    PCI Express Clock Drive.................: 900mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)...................: 0ps

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Dont have this option << this is memory specific, if your ram is not XMP or EPP Programmed you will not see this. Disabled anyway
    (G)MCH Frequency Latch...............: ?????????? << Set to Auto
    System Memory Multiplier ..............: ??????????? <<< Set to 3.20B (FSB x this = Ram speed)
    Memory Frequency (Mhz) ..............: 890 per above (300 FSB X 3.20B = 1066Mhz)
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................ 5 (??? should this match my memory timings as per the box?) << Yes, set to ram spec amount
    tRCD ......................................... 5
    tRP'........................................... 5
    tRAS.......................................... 18

    Advanced Timing Control
    tRRD........................................... 3 - Auto 3-4
    tWTR.......................................... 3 - Auto 3-6
    tWR............................................ 6 - Auto 4-6
    tRFC........................................... 46 - Auto 52-62 (Set 52 or more for now)
    tRTP........................................... 3 - Auto 3-5
    Command Rate (CMD) ....................:0 - Auto 1-2 (Set 2 for now)

    Channel A
    Static tRead Value.........................:3 - Auto 5-8 (Set 6-7 for now)
    tRD Phase0 Adjustment...................:0 - Auto
    tRD Phase1 Adjustment...................:0 - Auto
    tRD Phase2 Adjustment .................:0 - Auto
    tRD Phase3 Adjustment..................:0 - Auto
    Trd2rd(Different Rank)....................:6 - Auto
    Twr2wr(Different Rank)...................:6 - Auto
    Twr2rd(Different Rank)...................:5 - Auto
    Trd2wr(Same/Diff Rank)..................:8 - Auto
    Dimm1 Clock Skew Control...............: Auto
    Dimm2 Clock Skew Control...............: Auto
    DDR Write Training.........................: Auto
    Channel B
    Same as Channel A
    CPU
    CPU Vcore….……….........................: 1.25000V << More, all up to your CPU of course, maybe 1.28-1.38 or so for 3.3 - 3.75Ghz

    CPU Termination…..... 1.200V*.......: Auto << Set 1.225-1.3 for 3.3Ghz. This is Vtt I believe in DFI BIOS
    CPU PLL…………………....1.500V*.......: Auto Set 1.5, you may need a bit more at 333 FSB or above though.

    CPU Referen.…………....0.760V*.......: Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.200V Often for 4GB you need 1.20-1.24, looks like you know what you are doing here
    MCH Reference….…….0.760V...........; Auto
    MCH/DRAM Ref.…......0.900V...........: Auto
    ICH I/O……………….....1.500V............: Auto

    DRAM
    DRAM Voltage ……....1.800V............: 1.900V << Set to your ram spec, normally 1.9-2.1V
    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled] << Disable for overclocking
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled] << Disable for overclocking


    Are my temps too high anyone?? or is there anything that posters would consider a dangerous move??

    I'm hitting just under 40c at idle on a Sythe Ninja and P182 case (ULTRA QUIET, that's what I like) Check the attachment for pics

  7. #7
    Join Date
    Sep 2009
    Posts
    3

    Talking Re: E5200 + ga-ep45t-ud3p

    Ok I'm back... had some school stuff and a few performances that ate my time and energy... Good News though... I hit 3ghz on the second try last night and it seems to be a stable set up!!!
    So I just went and used ibewok's post as a template for my CPU settings since it's the same hardware. On the first go round I under volted the cpu (I think) then I tried it with a slightly higher voltage setting on round two and everything seems to run fine. The only things that I don't like are 1)That my ram is still on auto which I assume could be better calibrated manually and 2)I have almost no clue what to really do with the ram settings. Other than that it's pretty awesome I might even try to go faster later on but for now I'll stick to fine tuning this setup. I'll probably post my exact settings after I try tweaking it some.
    Thank you everyone for helping me get this far in clock speed.

    P.S. If anyone wants to help me with the RAM part then I'd be ultimately grateful...

    Thanks again
    -ICCEE

  8. #8
    Join Date
    May 2009
    Posts
    6

    Default Re: E5200 + ga-ep45t-ud3p

    The Ram thing is pretty darn easy actually. When you bought the ram it should have given a series of numbers like 9-9-9-24 then it should say a voltage like 1.8. Just plugin those numbers into the template and don't forget to put the voltage at the right setting. I don't know why but the my ram was way under-volted when I used the AUTO setting on this board.


    ICEE we should be really proud of ourselves, we are beating many OCer's with a $80 dollar chip. The average I have seen with the e8400 is like 4ghz, which is only a little more than my 3.75ghz. I have heard of people going to 3.33ghz on the stock cooling with the e5200. I'm playing GRID on 1080p full setting tonight and my chip stays under 50 degrees, it is awesome. For a computer junky, it's kinda disappointing, I don't want to do anything more to my computer, guess I'll have to retire for another three years and re-learn how to overclock again.

  9. #9
    Join Date
    May 2009
    Posts
    6

    Default Re: E5200 + ga-ep45t-ud3p

    It's been several months since my last post and I'm wondering if I'm the last e5200 overclocker here . I know lots of OCer's are flocking to the AMD recently and yes everyone wants an e8400 or Q8600 to overclock with, but common do you really want to shell out $170-200 (e8400 haven't gone down in price, luckily the Quads-cores the Q8600 fell within striking range) for an extra core (which can be used in 3% of the games available for PC) or a 10% performance gain with extra cache? I say, HELL NO!!! , remember ya'll... we are overclockers and tweakers, we all started doing this because we are cheap *******s and to to fight back againts the price structure and binning processes that have been holding us subjugated to under 4ghz for almost tens years! A $54 e5200 will reliably go to 3.5ghz (40% increase of 1000mghz overclock!!!) with a little bit of patience and any gigabyte board and any ram. And to think that Intel tried to recast all the newer "Dual Cores" after the e5200 as "Core 2 Duo" because they added some cache and they didn't even add significantly more on many "Core 2 Duo" (such as adding 1mb cache instead of 2). I know I have been waiting for the day I can hit 4ghz for a dam long time and I'm not about to go out and spend $180 for an e8400 just so I can add 500mghz and extra cache to my 3.5ghz PC that my e5200 runs perfectly,... I am going to wait until they llower the bin on a crappy version of the Intel Core i7-975 that is only $100 after rebate, unlcok the multipler and watch that freakin chip fry until it hits 5ghz reliably.... and do you know why???.....because I am an OVERCLOCKER AND THAT'S HOW WE ROLE!!!

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: E5200 + ga-ep45t-ud3p

    I think there is one or two users here with 5200, don't see them often though.

    8400 or 920 is the overclocking chips these days. You can get a E8400/E3110 on ebay for $90-110, did you know that? Those will all hit 4Ghz

    Let me know if you need help finding a good chip for cheap! I also know a few forums where you could also shop.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •