Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: I7 930 overclock help




  1. #1
    Join Date
    Jun 2009
    Location
    LIBYA
    Posts
    21

    Default I7 930 overclock help

    HI MY FRIENDS HOW ARE YOU?

    AT FIRS I HAVE REPLACED MY 17 920 CO / WITH 17 930 DO
    SO HERE IT IS MY PC
    I7 930
    COOLER MASTER V10
    3*2G RAM CORSAIR 3 CHANNEL
    GIGABYTE X58-UD3R BIOS F11
    CASE SUMO 5115 FULL TOWER
    1200W GIGABYTE
    GIGABYTE GTX470
    GIGABYTE 240GT FOR PHYSX
    CREATIVE X-FI TITANUME


    I OVERCLOCKED MY 930 TO 3.8 ON CPU V 1.23 AND QPI VTT V 1.29 AND THIS WAS THE BEST I GOT TH MAX TEMP WAS 76C



    Uploaded with ImageShack.us

    THIS IS MY BIOS SITTING

    Advanced CPU Features: CPU Clock Ratio ................................ [21x]
    Intel(R) Turbo Boost Tech .................. [Disabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Disabled] CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled] Uncore & QPI Features: QPI Link Speed .............................. x36
    Uncore Frequency .......................... (auto)
    Isonchronous Frequency ..................[Enabled]
    Standard Clock Control: Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................[180]
    PCI Express Frequency (MHz) ........... [AUTO]
    C.I.A.2 [Disabled] Advanced Clock Control:
    CPU Clock Drive ..............................[700mV]
    PCI Express Clock Drive ................... [700mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    Advanced DRAM Features: Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [8]
    DRAM Timing Selectable (SPD) .......... [Manual]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ..................... [8]
    tRCD ..................................[8]
    tRP ...................................[8]
    tRAS ................................. [24]


    ##Channel A Advanced Timing Control##
    tRC ........................................[AUTO]
    tRRD .......................................[AUTO]
    tWTR ...................................... [AUTO]
    tWR ........................................[AUTO]
    tWTP .......................................[AUTO]
    tWL ........................................[AUTO]
    tRFC .......................................[AUTO]
    tRTP .......................................[AUTO]
    tFAW ...................................... [AUTO]
    B2B CAS DELAY...............................[AUTO]
    Command Rate (CMD) ..........................[1]

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................[AUTO]



    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ...............................[1.23]
    QPI/VTT Voltage 1.150v ..................[1.29]
    CPU PLL 1.800v ..........................[AUTO]

    MCH/ICH
    PCIE 1.500v ..........................[AUTO]
    QPI PLL 1.100v .......................[AUTO]
    IOH Core 1.100v .....................[AUTO]
    ICH I/O 1.500v .......................[AUTO]
    ICH Core 1.1v ........................[AUTO]

    DRAM
    DRAM Voltage 1.500v .......[1.64]
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

    THIS WAS THE BEST I COULD DO
    SO CAN MY PC HIT 4GH OR MORE ?
    THANK YOU GUYS
    Last edited by hisham.errish; 08-30-2010 at 12:42 AM.

  2. #2
    Join Date
    Sep 2010
    Location
    Norther Virginia
    Posts
    296

    Default Re: I7 930 overclock help

    first off your max temp is high. what thermal paste did you use? and whats your cooling? You arent going to get higher with a 76c max at 3.8 with a 1.23vcore. no load line, no extra cpu volts, AND advanced halt states on (C!E/C5/C6 and all those) fyi you need to turn those off.

  3. #3
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: I7 930 overclock help

    Quote Originally Posted by hisham.errish View Post
    Advanced Clock Control:
    CPU Clock Drive ..............................[700mV]
    PCI Express Clock Drive ................... [700mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    First off Enter bios and chose Load Optimized Defaults. Press F10 save and Exit.
    These settings are set with Load Fail Safe.

    After Loading Optimized Defaults go back in and retry your settings leaving the above settings set as they are from optimized defaults.

    Quote Originally Posted by sin0822 View Post
    You arent going to get higher with a 76c max at 3.8 with a 1.23vcore. no load line, no extra cpu volts, AND advanced halt states on (C!E/C5/C6 and all those) fyi you need to turn those off.
    Only need to disable them if you have problems getting stable and/or with reasonable voltages.

    Yes please recheck your thermal paste as you may have used not enough or to much or you may not have your cpu cooler installed correctly.

    Uncore has a RULE it MUST be 2x memory multi. Your using 8x memory multi set uncore to 16x +1 or +2 is ok or even higher (will require more qpi/vtt voltage)

    Set PCI-e to 100 mhz
    QPI PLL 1.1 - 1.6v
    IOH Core 1.1 - 1.3v

    Besides Vcore, QPI/Vtt, Vdimm and ones listted above all others can be set to auto.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  4. #4
    Join Date
    Sep 2010
    Location
    Norther Virginia
    Posts
    296

    Default Re: I7 930 overclock help

    all im trying to say is that he has insanely high temperatures and it doesn't seam like he has done anything to cause them to go higher. Disabling the halt states or turning on or changing the voltages i listed would take his temperatures further up, an that would be bad, he doesn't have that much head room until he figures out his cooling.

  5. #5
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: I7 930 overclock help

    @sin0822.. I wasnt doubting you on his temps and/or head room. Just that everyone says you wanna overclock you needed to disable all the C states and power save features. Which is not true. Why disable them if you dont have too. Thats all...
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  6. #6
    Join Date
    Sep 2010
    Location
    Norther Virginia
    Posts
    296

    Default Re: I7 930 overclock help

    yea i never thought about it, i always thought that if i overclocked id want to know how stable it was in real life performance, so id disable them so i could see how it ran 24/7 without lowering it's multi and gaining stability from lower clock at idle. Just keeping it consistent so i could see how it performed, but i guess id turn it off after in theory, but i never get to doing it, might help me with temps.... thanks

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •