Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: A7V266-E & XP2100+ - Core Voltage ?




  1. #1
    Join Date
    Jan 2003
    Posts
    36

    Default

    Hi Folks,

    Have noticed my A7V266-E running a core voltage of 1.85V (jumperfree mode). From what I've seen, this is too high if I'm running non o/c'd.

    Does anyone have any information regarding proper core voltage for this board/proc combo ?

    If urls exist with this info, please point me in the right direction.

    Thanks,
    Greg.
    AthlonXP 2100+ | Volcano 7+ | ASUS A7V266-E| 512mb DDR PC2100PS: EG365P-VE | 80gig IBM Deskstar Hd | 60gig IBM HD| MSI GF4 Ti4200 128 Megs| 24x10x40 Lite-ON| Cooling: 2 Thermaltake 80mm 37cfm fans, 1 x 90mm 56CFM| CPU 42C/46C & Case @ 26c

  2. #2
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    Just set it to 1.75v. ;)


  3. #3
    Join Date
    Jan 2003
    Posts
    36

    Default

    Is this the 'default' for XP procs ? Will BIOS updates allow for voltage configuration, or is jumper mode the better way to go with these boards?

    While I'm at it - will this change make any difference in cpu temps ? The box seems to be running 100% stable - won't bother unless it's worth the change.

    Greg.
    AthlonXP 2100+ | Volcano 7+ | ASUS A7V266-E| 512mb DDR PC2100PS: EG365P-VE | 80gig IBM Deskstar Hd | 60gig IBM HD| MSI GF4 Ti4200 128 Megs| 24x10x40 Lite-ON| Cooling: 2 Thermaltake 80mm 37cfm fans, 1 x 90mm 56CFM| CPU 42C/46C & Case @ 26c

  4. #4
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    Check them out for ya self then, http://users.erols.com/chare/elec.htm

    Less voltage = Less heat

  5. #5
    Join Date
    Jan 2003
    Posts
    36

    Default

    Question: Do I need to hard-jumper *all* settings on this board before the BIOS will release control ? BIOS reports 1.75, yet Hmonitor shows 1.82. Very strange.


    Greg.:confused:
    AthlonXP 2100+ | Volcano 7+ | ASUS A7V266-E| 512mb DDR PC2100PS: EG365P-VE | 80gig IBM Deskstar Hd | 60gig IBM HD| MSI GF4 Ti4200 128 Megs| 24x10x40 Lite-ON| Cooling: 2 Thermaltake 80mm 37cfm fans, 1 x 90mm 56CFM| CPU 42C/46C & Case @ 26c

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •