Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: Newer HP1000 models and Runcore




  1. #1
    Join Date
    Jun 2009
    Posts
    1

    Default Newer HP1000 models and Runcore

    On the HP 1030NR, potentially other HP1000 series netbooks, only half of the SSD bay is available, and so a Runcore drive will not physically fit. Before picking up a Runcore drive for a HP1000 series, pop off the keyboard by removing the two screws under the battery, and look at the bay. If there's not room for a full 1.8" drive, then you're not going to be able to fit the Runcore in.

    The included cables are at least twice as thick as they should be. In addtion to the complaints others have raised about this, the socket on the runcore physically cracked after cable insertion. The cable HP uses has no issue, goes in and out with no pressure just like it should -- on both the stock drive and the Runcore.

  2. #2
    Join Date
    Jun 2009
    Posts
    15

    Default Re: Newer HP1000 models and Runcore

    the USB port can remove under the ssd, after remove, may have room for 1.8 ZIF
    the original cable works on the 1.8ZIF
    Last edited by verphilbio; 06-30-2009 at 12:07 PM.

  3. #3
    Join Date
    Jun 2009
    Posts
    36

    Default Re: Newer HP1000 models and Runcore

    I have 2 picture,may be referenced!

  4. #4
    Join Date
    Jun 2009
    Posts
    36

    Default Re: Newer HP1000 models and Runcore

    2

  5. #5
    Join Date
    Jun 2009
    Posts
    61

    Default Re: Newer HP1000 models and Runcore

    nice move, tony~

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •