Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Runcore IV standby/hibernate problem (not with Runcore 3)




  1. #1
    Join Date
    Oct 2009
    Posts
    11

    Default Runcore IV standby/hibernate problem (not with Runcore 3)

    i have standby/hibernate problems with the runcore RCP-IV-S7032-C in an eee pc 901
    the standby function in winxp does not work all the time and hibernation also sometimes failed!
    speeds are ok, but standby not work! i updated to the latest windows and bios drivers, the problems occur now less but still is there!
    before i had runcore version 3, RCP-I-S7016-C and i had no standby problems with this one!
    many other people report standby issues.
    i need advise as the standby function is important.

  2. #2
    Join Date
    Oct 2009
    Posts
    11

    Default Re: Runcore IV standby/hibernate problem (not with Runcore 3)

    what i tried:

    - paid driver update util (did not helped, but improved/reduced this problem)
    - os reinstall (did not helped)
    - bios reset (did not helped)
    - bios upgrade (did not helped)

    what i have:

    standby fails 1 on 5 times (black screen, with a _ blinking (same like no hard disk found)

    i am willing to do anything to get this fixed!

  3. #3
    Join Date
    Oct 2009
    Posts
    11

    Default Re: Runcore IV standby/hibernate problem (not with Runcore 3)

    with the previous version runcore i never had this problem
    with the IV i have it

    the IV runs in udma 5 mode, also something i don't understand! as it supports udma 6 (sata instead of ide)

    i tried anything to enable udma 6 buth no luck

    on the other hand the system is stable for the rest and the speeds are visable, only the most important standby function does not work!

    i am sure its not a xp driver problem but a runcore/hardware in combination with bios/hardware problem!

  4. #4
    Join Date
    Oct 2009
    Posts
    11

    Default Re: Runcore IV standby/hibernate problem (not with Runcore 3)

    i also want to report that the runcore ssd is 1 on 5 times not recognised by the eee 901 bios

    i have to reboot many times or remove the battery and reinsert it a few times to get it working again :-(

  5. #5
    Join Date
    Oct 2009
    Location
    CN
    Posts
    172

    Default Re: Runcore IV standby/hibernate problem (not with Runcore 3)

    Hi,

    We suggest you could try the belowing methods:

    1> Make sure the Windows driver had installed in full.

    2> Maybe you could try again by Windows XP SP3 or Windows Vista

    3> SATA SSD works in EPC901 is with SATA 1.0 instead of UDMA

    If all the methods you've already tried and doesn't work no longer then we could try by applying with updated firmware.

    RunCore Tech_Support

  6. #6
    Join Date
    Oct 2009
    Location
    Tokyo
    Posts
    13

    Default Re: Runcore IV standby/hibernate problem (not with Runcore 3)

    you can reinstall an OS and try again. The OS cannot wakeup is a very complex thing, maybe have relation with mainboard/compatiblility/system/driver/....

    good luck
    Last edited by DDUP; 10-20-2009 at 06:44 PM.

  7. #7
    Join Date
    Apr 2009
    Location
    NY
    Posts
    160

    Default Re: Runcore IV standby/hibernate problem (not with Runcore 3)

    Also do you have a RMA upgrade in there? Some people have told me that this problem occurs when there is a RAM incompatibility. If you do have an upgrade in there try to put your old RAM back in and see if that solves the problem.

    Matt

  8. #8
    Join Date
    Oct 2009
    Location
    Madrid
    Posts
    17

    Exclamation Re: Runcore IV standby/hibernate problem (not with Runcore 3)

    Itīs an Indilinx Issue not related to our machines, just check it online. Check the Threat:

    http://forums.tweaktown.com/f78/macb...3/index17.html

    Runcore Please release new firmware to resolve the issue.

    Thanks

  9. #9
    Join Date
    Oct 2009
    Posts
    11

    Default Re: Runcore IV standby/hibernate problem (not with Runcore 3)

    Quote Originally Posted by RunCore Tech_Support View Post
    Hi,

    We suggest you could try the belowing methods:

    1> Make sure the Windows driver had installed in full.

    2> Maybe you could try again by Windows XP SP3 or Windows Vista

    3> SATA SSD works in EPC901 is with SATA 1.0 instead of UDMA

    If all the methods you've already tried and doesn't work no longer then we could try by applying with updated firmware.

    RunCore Tech_Support

    its 100% a runcore firmware problem!
    currently 15xx version is installed with the standby bug! RCP-IV-S7032-C
    please send new firmware to webmasters@skynet.be
    Last edited by cmbdakri; 10-31-2009 at 10:43 PM.

  10. #10
    Join Date
    Oct 2009
    Location
    Germany
    Posts
    17

    Default Re: Runcore IV standby/hibernate problem (not with Runcore 3)

    it would be better if they would upload the firmware so that anybody would have access to it

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •