Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Blue screen with Runcore SSD 128G Pro IV ZIF 1.8




  1. #1
    Join Date
    Dec 2009
    Location
    England
    Posts
    4

    Default Blue screen with Runcore SSD 128G Pro IV ZIF 1.8

    I have installed a new Runcore SSD 128G Pro IV ZIF 1.8 on an HP 2710p but am getting blue screen crashes frequently, once every few hours. This was not happening with my previous SSD (not Runcore). I have checked the ribbon cable and it looks fine. Do I have a faulty SSD or is it a firmware issue? The firmware version I have is 1819.

    Many thanks for any help!

  2. #2
    Join Date
    Oct 2009
    Location
    CN
    Posts
    172

    Default Re: Blue screen with Runcore SSD 128G Pro IV ZIF 1.8

    Hello, tomkat

    Can you privide the SN and PN code of your SSD to support@runcore.com ?

  3. #3
    Join Date
    Dec 2009
    Location
    England
    Posts
    4

    Default Re: Blue screen with Runcore SSD 128G Pro IV ZIF 1.8

    I emailed Runcore support 13 days ago (19 January 2010) but have not received a reply. I have now returned the SSD to the vendor.

  4. #4
    Join Date
    Feb 2010
    Location
    UK
    Posts
    2

    Default Re: Blue screen with Runcore SSD 128G Pro IV ZIF 1.8

    I have the same problem with my NC2400 and a 32GB card.
    My laptop hangs apart from the mouse for about 30 seconds then bluescreens, it auto rebooots after the bluescreen and shows "non system disk or disk error" If you then physically power off the laptop and power it back on it will work again just fine.
    Somedays it will do it several times other not at all, very annoying :(
    It has been doing this since I put it in about 2 weeks ago.

    Any advice?

  5. #5
    Join Date
    Feb 2010
    Location
    Spain
    Posts
    3

    Default Re: Blue screen with Runcore SSD 128G Pro IV ZIF 1.8

    I'm having exactly the same problem. My sistem is HP 2710p running Windows 7 Professional and SSD Runcore IV 128 GB.

    Quote Originally Posted by cattlerustler View Post
    I have the same problem with my NC2400 and a 32GB card.
    My laptop hangs apart from the mouse for about 30 seconds then bluescreens, it auto rebooots after the bluescreen and shows "non system disk or disk error" If you then physically power off the laptop and power it back on it will work again just fine.
    Somedays it will do it several times other not at all, very annoying :(
    It has been doing this since I put it in about 2 weeks ago.

    Any advice?

  6. #6
    Join Date
    Oct 2009
    Posts
    12

    Default Re: Blue screen with Runcore SSD 128G Pro IV ZIF 1.8

    Same with my 128GB IV on X40 running Win7 pro.

    Quote Originally Posted by cattlerustler View Post
    I have the same problem with my NC2400 and a 32GB card.
    My laptop hangs apart from the mouse for about 30 seconds then bluescreens, it auto rebooots after the bluescreen and shows "non system disk or disk error" If you then physically power off the laptop and power it back on it will work again just fine.
    Somedays it will do it several times other not at all, very annoying :(
    It has been doing this since I put it in about 2 weeks ago.

    Any advice?

  7. #7
    Join Date
    Oct 2009
    Location
    Iowa
    Posts
    17

    Default Re: Blue screen with Runcore SSD 128G Pro IV ZIF 1.8

    are the SSDs you guys are having problems with PATA or SATA?

    I am having problems with SSDs that have TRIM enabled (both Intel G2 and Runcore). All signs in my system point to a PATA to SATA bridge IC on the motherboard of the system...not the SSD. I could also see there being a problem with SATA to PATA bridge ICs, if that is how your system is configured.

    Investigation is underway.

  8. #8
    Join Date
    Oct 2009
    Posts
    12

    Default Re: Blue screen with Runcore SSD 128G Pro IV ZIF 1.8

    Quote Originally Posted by redly1 View Post
    are the SSDs you guys are having problems with PATA or SATA?

    I am having problems with SSDs that have TRIM enabled (both Intel G2 and Runcore). All signs in my system point to a PATA to SATA bridge IC on the motherboard of the system...not the SSD. I could also see there being a problem with SATA to PATA bridge ICs, if that is how your system is configured.

    Investigation is underway.
    It is PATA on IBM TP X40. Same happened with FW1819 and FW1916.

    Thank you.

  9. #9
    Join Date
    Feb 2010
    Location
    Spain
    Posts
    3

    Default Re: Blue screen with Runcore SSD 128G Pro IV ZIF 1.8

    any news?
    Any improvement upgrading the firmware to 1916?

  10. #10
    Join Date
    Oct 2009
    Posts
    12

    Default Re: Blue screen with Runcore SSD 128G Pro IV ZIF 1.8

    Quote Originally Posted by Manuscha View Post
    any news?
    Any improvement upgrading the firmware to 1916?
    Hi,

    For me not. Still random blue-screens occurred on Win7.

    Now I have disabled trim function and did not get any blue screens since.

    Has anybody got blue screen with disabled trim function on Win7?

    Regards,

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •