Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: USB Device not recognized with PATA ZIF to USB adapter




  1. #1
    Join Date
    Jan 2010
    Location
    Sioux Falls
    Posts
    2

    Default USB Device not recognized with PATA ZIF to USB adapter

    I just received a new RunCore 1.8 PATA ZIF SSD drive which came with a PATA ZIF to USB adapter and external drive case. I have tried to connect the USB adapter to several computers with both XP and Win 7, with and without a drive connected, and with a couple different drives. Every time I connect the USB adapter the system recognizes that something has been plugged in but on every system and in every situation the computer reports "USB device not recognized". I ordered this item from the runcorestore.com site and am curious if one of the admins here can advise how to obtain support or replacement for this part. My order number is RCS-1976. Thanks for your assistance.

    Jim

  2. #2
    Join Date
    Oct 2009
    Location
    Iowa
    Posts
    17

    Default Re: USB Device not recognized with PATA ZIF to USB adapter

    sounds like either the USB board in the case is bad, or the zif cable is not seated properly.

    PM me with your addy, I can send you one of my spare enclosures

  3. #3
    Join Date
    Apr 2010
    Location
    Melbourne
    Posts
    1

    Default Re: USB Device not recognized with PATA ZIF to USB adapter

    Hi there.. I have the same problem. RunCore 64Gb PATA ZIF..
    Have re-seated the connectors a couple of times to be sure each end has a secure grip on the ribbon cable, but device is still unrecognized by two test PCs.. "USB device not recognized"..
    Did you find the fault - was it a bad USB board or something else?
    Any clues appreciated..
    Al.

  4. #4
    Join Date
    Oct 2009
    Location
    CN
    Posts
    172

    Default Re: USB Device not recognized with PATA ZIF to USB adapter

    Hello wilkal,

    You can check the connection of ZIF cable with ZIF adapter and SSD whether is correct or not.

  5. #5
    Join Date
    Sep 2009
    Posts
    10

    Default Re: USB Device not recognized with PATA ZIF to USB adapter

    if u have a try to make sure the ssd can be recognized in the notebook(in the BIOS),when u install the ssd in it without the adapter?

  6. #6
    Join Date
    Apr 2010
    Location
    Madrid
    Posts
    5

    Default Re: USB Device not recognized with PATA ZIF to USB adapter

    My Runcore is not detected if i do not use the usb cable provided, it is a usb cable that connects to two usb ports at the same time, to get extra power.

    In the other side, if XP failed to detect it the first time, XP tends to cache the configuration so it will never be detected in that same port, even if correctly connected. You have to boot in "secure mode" and connect the drive in that mode in order to get usb ports configurarion refresh.

    It took me some days to figure this, i hope it helps.
    Aiken

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •