Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: How to fix a 64GB pro IV SSD when flashed from firmware 1571 to 1916?




  1. #1
    Join Date
    Sep 2010
    Location
    France, Montpellier
    Posts
    12

    Default How to fix a 64GB pro IV SSD when flashed from firmware 1571 to 1916?

    since i'm not getting any answer from the support (not even 1 email received :( ), is there anybody knowing how to fix a SSD disk when it was flashed from 1571 to 1916 firmware, wich locked the drive?

  2. #2
    Join Date
    Sep 2010
    Location
    France, Montpellier
    Posts
    12

    Default Re: How to fix a 64GB pro IV SSD when flashed from firmware 1571 to 1916?

    i just got an answer from Runcore support:

    Dear customer

    We do apologize for the inconvenience.
    For some SSDs, it needs to be update to 1819 before to 1916.
    Please read the instruction attached carefully, and run the 1819 firmware updating process again.
    Also, before connect the drive via USB connector, u might need tweezers to connect those two "J1" holes in order to set the drive back to factory mode.

    Regards,
    Runcore support



    with the good firmware :)


    but now... should i connect the J1 jumper when the disk is connected through USB or not?

  3. #3
    Join Date
    Sep 2010
    Location
    France, Montpellier
    Posts
    12

    Default Re: How to fix a 64GB pro IV SSD when flashed from firmware 1571 to 1916?

    i got another answer from runcore support...

    to repair the disk, the USB adaptator have to have a green PCB... for me it's not the case :(

  4. #4
    Join Date
    Aug 2010
    Location
    Australia
    Posts
    6

    Default Re: How to fix a 64GB pro IV SSD when flashed from firmware 1571 to 1916?

    Hi there, any chance you could post the instructions they gave you? I'm in the same boat and need to fix this soon.

    Thanks heaps,

    Goldy

  5. #5
    Join Date
    Oct 2009
    Location
    CN
    Posts
    172

    Default Re: How to fix a 64GB pro IV SSD when flashed from firmware 1571 to 1916?

    Quote Originally Posted by lehua768 View Post
    We do apologize for the inconvenience.For some SSDs, it needs to be update to 1819 before to 1916.
    Please read the instruction attached carefully, and run the 1819 firmware updating process again.
    Also, before connect the drive via USB connector, u might need tweezers to connect those two "J1" holes in order to set the drive back to factory mode.since i'm not getting any answer from the support (not even 1 email received :( ), is there anybody knowing how to fix a SSD disk when it was flashed from 1571 to 1916 firmware, wich locked the drive?

    Would it be comfortable if you send some screenshots of your SSD and the adaptor to support@runcore.com? We may then be able to locate the relevant reinitializing file for you.

    Thank you

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •