No announcement yet.

GA-Z97X-UD5H-BK with SSD M.2 Plextor M8PeG 256gb. low speed after shut down

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GA-Z97X-UD5H-BK with SSD M.2 Plextor M8PeG 256gb. low speed after shut down

    Hi. I have a problem with GA-Z97X-UD5H-BK (rev.1.0, bios F8) and my SSD Plextor M8PeG m.2 NVME 256 gb (latest firmware, 1.06). SSD is inserted into the PCI-E ASUS adapter (HYPER M.2 X4 MINI CARD), works in the ACHI mode.

    When I install windows (win7 x64 or win10 x64) and I hold testing of speed, my ssd works at full speed (2000 mb/sec read, 880 mb/sec write) in any tests (CrystalDiskMark, ATTO Disk Benchmark). I can make soft reset any number of times and speed remains former.

    But when I am shut down my PC, I switch off a supply, then I turn on the computer, and again I hold testing of speed of ssd, it shows low speed in all tests (about 170 mb/sec read, 180 mb/sec write). And further it always shows such low speed, switching off and reset doesn't influence change of speed in any way. SSD works at such low speed.

    I tried to use the plug SSD of m.2 port on the motherboard - all in the same way.
    I tried the BIOS F9b for the motherboard - in the same way, the speed of the SSD after shutting down the PC is low.

    Please help to solve a problem! (sorry for my english)

    1. MB GA-Z97X-UD5H-BK (1.0), bios F8.
    2. RAM - G.Skill F3-2400C10D-16GTX, 2x8Gb.
    3. CPU – i7-4790K
    4. Video – Gigabyte GeForce GTX 970 G1 Gaming 4096MB
    5. SSD - Plextor M8PeG 256Gb M.2 2280 MLC
    Attached Files
    Last edited by jozer1; 05-22-2017, 09:05 AM.

  • #2
    Re: GA-Z97X-UD5H-BK with SSD M.2 Plextor M8PeG 256gb. low speed after shut down

    3_test atto_after shut down win7x64
    Attached Files

    Comment

    Working...
    X