No announcement yet.

B360M DS3H Motherboard - no signal to monitor with radeon r9 285x after motherboard upgrade

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • B360M DS3H Motherboard - no signal to monitor with radeon r9 285x after motherboard upgrade

    Hello everyone,
    my situation is this, my old setup had some problems so i finally took the step and upgraded the general facilitys.
    new motherboard, cpu and ram.
    specs are:
    gigabyte B360M DS3H motherboard
    crucial 8gb ddr4 2400 ram
    intel i5 8400 cpu

    and i also reused my old gpu
    a radeo r9 285x

    after all the work im left at this impass:

    i can boot up the pc ok and start windows 10 BUT i can only use a
    monitor if i go over the cpu graphics. if i have my gpu active every one
    of my 3 monitors stays black (pc seems to start normally. mouse and
    keyboard light up and i can use capskey to switch lights.)

    i guessed that it would be the missing drivers for my graphics card but
    when i use the internal graphics i have to deconnect the gpu or its getting used automaticaly (even when i enable internal graphics in bios) so the computer doesnt recognize the gpu and thus the drivers
    program doesnt say it finds hardware for drivers.

    i tried every possible driver update i could think of, chipset, os, io driver etc. the only thing i couldnt do yet is update bios, cause when i tried the update utility of my bios doesnt recognize any usbdrives and doesnt let me search my internal harddrive. only lets me into a folder named efi that i cant see when i've booted to windows...

    tldr:
    gpu doesnt send signal to monitors after motherboard upgrade.
    is it the missing gpu drivers or should atleast some signal come through the gpu even without drivers? if drivers are problem how can i
    install them without signal to monitor, and i also have to disconnet gpu
    to use cpu graphics?

    hope someone can help me. big thanks in advance :3

  • #2
    Re: B360M DS3H Motherboard - no signal to monitor with radeon r9 285x after motherboard upgrade

    it maybe your graphics card is not UEFI BIOS.
    The default of CSM on this board is disabled.
    You may try to enable CSM in bios setup to check if it helps.

    Comment

    Working...
    X