Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: HDD & DVD/CDrom




  1. #1
    Join Date
    Mar 2004
    Posts
    2,910

    Default

    I'm having a ***** of a time getting the Bios to recognize both my WD 100gb HDD and my HP DVD/CDRom.

    Motherboard is Soyo P4S Dragon Ultra. Award BIOS 2001.

    I have the HDD on IDE1, the DVD on IDE 2.

    The BIOS only recognizes one of the units. It recognizes the HDD if the DVD is attached to IDE2.

    If I leave IDE1 empty and DVD on IDE 2, the BIOS recognizes the DVD/CDrom and looks for a cd-rom boot disk.

    How do I get this working?

  2. #2
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    Well it is best to have each device on seppart channels as this allows faster transfers but your problem maybe with the jumpers on the drives which are locate on the rear of each so make sure that both are set to be masters. Also if both are set to master on 1 IDE channel then this will cause both not to be seen. Check to make sure that cable select in not what the jumpers are set at. :smokin:
    <center>:cheers:</center>

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •