Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 7 of 7

Thread: IDE Channel 0 no 80 conductor cable installed "no 80 conductor cable installed"




  1. #1
    Join Date
    Nov 2005
    Posts
    4

    Unhappy IDE Channel 0 no 80 conductor cable installed "no 80 conductor cable installed"

    Okay...here's the scoop. I bought a generic computer, took the hard drive from the old, turned it to a slave and added it to the new computer. Then I loaded Win XP Pro on the new drive (which is the master while the old is the slave).

    Everything worked like a charm for two months. The idgits for whom I did all this work downloaded from Kaazaaaah...after two months she had over 700 little viruses and spyware issues. But the ultimate issue was the computer quit recognizing the DVD drive, the CDRW and the floppy drive.

    I cleaned the viruses with AGP and Ewido...got her clean as a whistle. The computer worked, much faster; but still did not show the floppy, CD or DVD drives. Everything else worked fine.

    We reset the bios, flashed the bios and then re-formated the new hard-drive; now when I turn her on, she says, "IDE Channel 0 no 80 conductor cable installed" and then eventually gets to where she says, "NTLDR is missing."

    By the way, all the components, motherboard, HDD, CD, DVD and floppies have been individually loaded to another computer and worked, but when all are together, nothing works. I've even tried a completely new set of cables.

    I'm at the end of my ideas...anyone out there who has a big white horse with solutions?



    Salsarow.

    Once the stew is ruined, anything you add to save it will only make it worse.
    Last edited by salsarow; 11-22-2005 at 10:25 AM.

  2. #2
    Join Date
    Nov 2003
    Location
    Minnesota, United States
    Posts
    4,543

    Default Re: IDE Channel 0 no 80 conductor cable installed "no 80 conductor cable installed"

    The error message would usually suggest something else, but it's possible that you have on of the IDE drives on the wrong jumper setting (slave, master, cable select). That's the only thing I can think of for why they all work but not together.

  3. #3
    Join Date
    Nov 2005
    Posts
    4

    Default Re: IDE Channel 0 no 80 conductor cable installed "no 80 conductor cable installed"

    Quote Originally Posted by Yawgm0th
    The error message would usually suggest something else, but it's possible that you have on of the IDE drives on the wrong jumper setting (slave, master, cable select). That's the only thing I can think of for why they all work but not together.
    I hate to say it, but I've checked those settings until my eyes bugged out.

    Salsarow

  4. #4
    Join Date
    Nov 2005
    Posts
    4

    Default Re: IDE Channel 0 no 80 conductor cable installed "no 80 conductor cable installed"

    Okay, I've made some progress. I reformed...again, the Master drive. Re-installed it and now I get "NTLDR is missing".

    Any ideas?

  5. #5
    Join Date
    Nov 2003
    Location
    Minnesota, United States
    Posts
    4,543

    Default Re: IDE Channel 0 no 80 conductor cable installed "no 80 conductor cable installed"

    That one has a lot more causes, and they're not necessarily related to the hard drive or IDE channel.

    Try running memtest86+, found in my signature. Also, please post the system specs.

  6. #6
    Join Date
    Nov 2005
    Posts
    4

    Default Re: IDE Channel 0 no 80 conductor cable installed "no 80 conductor cable installed"

    Quote Originally Posted by Yawgm0th
    That one has a lot more causes, and they're not necessarily related to the hard drive or IDE channel.

    Try running memtest86+, found in my signature. Also, please post the system specs.
    AMD Sempron 2600 64 bit supported
    1600 MHz
    512 MB /133MHz (DDR266)
    Win XP Pro
    Maxtor 30 Gig HD

    Blue screening me now:

    STOP: c0000221 unknown hard error
    \SystemRoot\Seystem32\ntdll.dll

    new motherboard and CPU

    Any ideas?

    Salsarow


    "No good deed goes unpunished." (Johnny Carson)

  7. #7
    Join Date
    Nov 2003
    Location
    Minnesota, United States
    Posts
    4,543

    Default Re: IDE Channel 0 no 80 conductor cable installed "no 80 conductor cable installed"

    Do you have any other copies of Window XP?

    Also, did you try memtest yet?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •