Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: Seagate Tape Drive




  1. #1
    Join Date
    Nov 2001
    Posts
    173

    Default

    Ive just been given a Seagate Tap0e drive and Adaptec SCSI
    PCI card . Everything went well in the setup except it says this

    SCSI Bios not installed !! when booting up .

    This prevents it from working .

    Ive checked in the bios for a setting to no avail , must be a driver or something ?? It is old but still useful i think. Can any one help ??
    Athlon XP 1800 + @ 1600
    Gigabyte Ga-7va KT-400
    ASus Gf4 Ti 4200 128
    Seagate Barracuda III
    512mb Kingmax DDR 333

  2. #2
    Join Date
    Nov 2001
    Location
    Texas, USA
    Posts
    4,825

    Default

    Your SCSI board has it's own BIOS, so if the drivers aren't there, it doesn't know how to read it. Try hitting up the manufacturers website for drivers and possibly a BIOS update to the SCSI card.
    Old age and treachery will overcome youth and skill
    My Toys

  3. #3
    Join Date
    Nov 2001
    Location
    The Land of OZ!
    Posts
    674

    Default

    Most likely you'll have to hit some key combination like CTRL+ A to access the BIOS of your SCSI card and set the SCSI ID's it needs to scan to find the tape drive. also make sure your SCSI chain is terminated with the correct type of terminator [active/passive/LVD/HVD/etc], you'll probably need to make sure the SCSI id is set properly with the jumpers on the drive..

    This ain't Plug N Play its SCSI..


    SCSI... System Can't See It... [an old tagline I couldn't resist]..

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •