Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: sata drive 0, ide dvd slave




  1. #1
    Join Date
    Jun 2009
    Posts
    2

    Default sata drive 0, ide dvd slave

    intell dg35ec motherboard

    new WD 500 gig sata hd and new IDE DVD burner


    I can't get the bios to recognise the IDE dvd as a slave it is seen as primary master

    the sata drive is recognised as drive 0

    in the bios the boot order is dvd IDE is first to boot,the sata hd is second to boot

    the screen is saying

    "Intel (R) Bootagent GE V1.2,50
    Copyright (C) 1997-2007 Intel Corporation

    Intel CR Bootagent PXE Base Code PXE Build 086

    PXE-E61: media test failure,check cable
    PXE-M0F: Exiting Intel Boot Agent"

    then stays on with flashing cursor
    all equipment is new

    any help greatly appreciated

  2. #2
    Join Date
    Mar 2009
    Posts
    19

    Default Re: sata drive 0, ide dvd slave

    Your IDE channel is different than your SATA channel. To have a slave, implies that there is a master, which you don't have. Re-jumper your IDE DVD to CS or master (CS is probably better). Make sure your SATA HD is bootable and has an active partition.

    It sounds like the errors you are seing may be coming from your mobo trying to boot from LAN. Make sure that in your bios under boot order that everything after your SATA HD is disabled.

    1st boot device=DVD
    2nd boot device=HD
    3rd boot device=disabled
    Xeon W3680 @ 4.5 24/7
    Gigabyte X58A-UD7 rev2
    EK Supreme HF gold P1
    factory NB waterblock
    chilled water
    3x Super Talent 2000c7
    2x Sapphire Atomic 4890
    3x 40GB Raid0 OWC Mercury Extreme Pro SSD
    2x 2TB Seagate Barracuda XT sata3
    1x 1TB Hitachi Ultrastar
    Ultra X3 1KW
    Antec 1200
    Win7 x64 Ultra

  3. #3
    Join Date
    Jun 2009
    Posts
    2

    Default Re: sata drive 0, ide dvd slave

    thanks have abandoned IDE and will be using sata for both hd and dvd burner

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •