Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: Admin password not working on Buffalo LS Quad after Firmware upgrade




  1. #1
    Join Date
    Nov 2011
    Location
    Singapore
    Posts
    3

    Default Admin password not working on Buffalo LS Quad after Firmware upgrade

    Two days ago my two-week old 8TB LS-QVL/R5 dropped off the network. I connected directly using my PC's NIC, configured the static IP/turned off Firewall and got the Link station to appear in NAS Nav2 but it was in EM mode and told me it needed a firmware reinstall.

    I downloaded v1.54 but it wouldn't see the device until I used LSUpdater in Debug mode - I flashed it Ok and after a reboot it started appearing in NAS Nav2 on my network again. Unfortunately, even though the device name has been reset and I can see the storage is OK, I am unable to access using Web Admin - neither my specified password or the default work!

    I have tried the Power Off - Hold Function-Power On - Hold Function step about 7 or 8 times but I am still unable to get in using defaults

    PLEASE HELP!

  2. #2
    dJabba's Avatar
    dJabba is offline Member
    Join Date
    Sep 2010
    Location
    Denmark
    Posts
    295

    Default Re: Admin password not working on Buffalo LS Quad after Firmware upgrade

    My best guess would be, the default user/pass combo changed in the new firmware... I'd suggest their own forums, as I'd doubt you'd be the only one with such an issue, if my guess is correct.
    My advice - never visit a short-url, no matter who gives it to you. You can't trust any source at any time when you don't know your target
    Whitey: ROG Crosshair V Formula/Thunderbolt, AMD 1090T @ 3.2GHz w. NZXT Havic 140, Corsair XMS3 1333 8GB kit, HIS IceQ X HD 6870, Corsair Force GT 120GB, OCZ Vertex4 256GB, Kingston SSDNow 16GB, Samsung 500GB 3" in casedock when needed, Chieftec Nitro88+ 650W, NZXT H2 White, 3x Asus VS248 24"
    Snuggles: Zotac Zbox HD-ID40 (Atom d525, worst purchase ever on cpu), Patriot Pyro 60GB (Thanks to Tweaktown Giveaway), 4GB 800' DDR2 SO-DIMM
    Bcube (NAS): ASUS F1A75-I Deluxe, AMD A6-3500 @ 2.1GHz, LSI 9240-8i (M1015) controller, GSkill Ares 1866 8GB blue kit, 4x Seagate SV35.5 2TB, 1x Seagate Barracuda 1.5TB, 1x Samsung HD103UJ, 1x Samsung F4 2TB, Temp. Rebel9 Alu case, Corsair H60, 2x Icy Dock MB973SP-B, NZXT UI01, Enermax T.B. Silence on docks and cpu, Aurum 500W gold PSU. (Draws 65W average, doesn't peak above 100W at any time)

  3. #3
    Join Date
    Nov 2011
    Location
    Singapore
    Posts
    3

    Default Re: Admin password not working on Buffalo LS Quad after Firmware upgrade

    Thanks for taking the time to reply dJabba - I have post on the Buffalo Forums

    LS-QVL/R5 was in EM state so upgraded Firmware - n... - Buffalo Tech Forums

    If I get a response that works I'll post back here and share the good news!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •