Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 1 of 1

Thread: Slow performance on new RAID array after cloning old array?




  1. #1
    Join Date
    Feb 2010
    Location
    Australia
    Posts
    45

    Default Slow performance on new RAID array after cloning old array?

    Hi Everyone,

    I have just cloned a RAID array and I am concerned about it's performance.

    A bit of background...

    My Motherboard = ASUS Z9PE-D16
    RAID Card = PIKE 2008 LSISAS RAID card

    The initial RAID array consisted of 6 x 1TB Seagate Constellation (ST1000NM001) SAS drives in a RAID1+0 (10) configuration.

    The new array consists of 6 x 4TB WD SATA drives in a RAID1+0 (10) configuration.

    Initial performance is quite slow, but this may just be due to parity checking. On paper the original, and new drives are comparable.

    Whilst the original drives were SAS and the new drives are SATA they both operate at 7200RPM and have 6Gbps interfaces.

    My question is - "Is my initial slow performance likely due to parity checking, or will I experience ongoing slowness?"

    Any help here will be greatly appreciated. Furthermore whatever you offer with regard to help may assist a piece of Australian Cultural heritage!

    Kind Regards,

    Davo
    Last edited by Mr Davo; 10-11-2015 at 12:50 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •