Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 8 of 8

Thread: Rounded Cables for cdroms




  1. #1
    Join Date
    Feb 2003
    Posts
    4

    Default

    is the rounded cables recommended to use for the cdroms or cd burner??? i'm using 24" round cable by thermaltake

  2. #2

    Default

    Don't use cables any longer than 18" ... You get signal loss after that. Also, in my experience, rounded cables aren't better than modifying your existing flat ide cables, splitting them up into 3 or 4 sections (being very careful while doing so). Then use an elastic or cable tie or something similar to tie the middle of the cables together.

    Problem I've found with rounded cables, is the cable at the connectors tend to fray (not as bad as the u160 scsi cable I'm using in my rig, but that's another story heh) and the cables need to be replaced. Best i've found to use the standard cables and modify them.
    <font size=1>Pentium 4 2.53GHz @ 3.515GHz (FSB: 185; VCore: 1.725)</font>
    <font size=1><a href="http://www.thermaltake.com/products/heatsink/v7plus.htm">ThermalTake Volcano 7+</a></font>
    <font size=1><a href="http://www.albatron.com.tw/product/PX845PEV_800.asp">Albatron PX845PEV-800</a></font>
    <font size=1>512MB Samsung DDR333 @ DDR370</font>
    <font size=1><a href="http://www.ati.com/products/pc/radeon9700pro/">Radeon 9700 Pro 128MB</a></font>
    <font size=1><a href="http://www.adaptec.com/worldwide/product/proddetail.html?prodkey=ASC-29160">Adaptec 29160 Ultra160 SCSI Controller</a></font>
    <font size=1><a href="http://www.seagate.com/cda/products/discsales/marketing/detail/0,1081,321,00.html">Seagate ST373405LW 73GB U160 SCSI</a></font>
    <font size=1>Enermax EG465P-VE 450watt PSU</font>
    <font size=1>CPU Temp (100%): 39 C; HDD Temp (100%): 31 C (100%); Chipset Temp (100%): 32 C</font>

  3. #3

    Default

    depends how often you are removing the cables, unless you have cheap rounded ones :rolleyes: i have all rounded cables in all my systems, and my main system gets drives added/removed all the time. i admit the long cable issue was a worry, buti use standard length cables now, and not one cable has frayed/busted on me, although they do feel slightly weaker than normal cables...

    but the only difference between professionally rounded cables and home-made ones is the professional ones look better :P
    sKuLLsHoT
    www.morb.ath.cx

  4. #4

    Default

    I've only had a couple of rounded cables fray terribly on me, nothing to cry over :D ... Granted my u160 scsi cable is in terrible shape :) Afraid opening the case and removing the scsi controller card again to get at the FDD controller (if i ever need too) might be the end of that cable :)

    Even still, I'd just use regular IDE cables and split 'em down the center a couple of times (again being careful not to expose any wire)
    <font size=1>Pentium 4 2.53GHz @ 3.515GHz (FSB: 185; VCore: 1.725)</font>
    <font size=1><a href="http://www.thermaltake.com/products/heatsink/v7plus.htm">ThermalTake Volcano 7+</a></font>
    <font size=1><a href="http://www.albatron.com.tw/product/PX845PEV_800.asp">Albatron PX845PEV-800</a></font>
    <font size=1>512MB Samsung DDR333 @ DDR370</font>
    <font size=1><a href="http://www.ati.com/products/pc/radeon9700pro/">Radeon 9700 Pro 128MB</a></font>
    <font size=1><a href="http://www.adaptec.com/worldwide/product/proddetail.html?prodkey=ASC-29160">Adaptec 29160 Ultra160 SCSI Controller</a></font>
    <font size=1><a href="http://www.seagate.com/cda/products/discsales/marketing/detail/0,1081,321,00.html">Seagate ST373405LW 73GB U160 SCSI</a></font>
    <font size=1>Enermax EG465P-VE 450watt PSU</font>
    <font size=1>CPU Temp (100%): 39 C; HDD Temp (100%): 31 C (100%); Chipset Temp (100%): 32 C</font>

  5. #5
    Join Date
    Nov 2001
    Posts
    4,723

    Default

    properly rounded cables function exactly as well as flat cables as far as transferring data goes.
    No problem with using them for any IDE device.
    Do use cables 18" or less in length if at all possible to get the best dependability of data transfers.

    (and I've put a small nick or 2 in the insulation doing some rounding-at-home. a piece of electrical tape placed properly and all is well)
    The reason a diamond shines so brightly is because it has many facets which reflect light.

  6. #6
    Join Date
    Feb 2003
    Posts
    4

    Default

    I'm using the round cable for my cd burner(slave) and to my hard disk(master).
    and the lenght of the cable is 600mm, I have no problem with that, but suddenly when i removed the cable and put it on again, my cd burner works only on the first run and after that the burner won't work anymore,

  7. #7

    Default

    That's vecause your cable is 24" long :) Well at least one of the major contributing factors.
    <font size=1>Pentium 4 2.53GHz @ 3.515GHz (FSB: 185; VCore: 1.725)</font>
    <font size=1><a href="http://www.thermaltake.com/products/heatsink/v7plus.htm">ThermalTake Volcano 7+</a></font>
    <font size=1><a href="http://www.albatron.com.tw/product/PX845PEV_800.asp">Albatron PX845PEV-800</a></font>
    <font size=1>512MB Samsung DDR333 @ DDR370</font>
    <font size=1><a href="http://www.ati.com/products/pc/radeon9700pro/">Radeon 9700 Pro 128MB</a></font>
    <font size=1><a href="http://www.adaptec.com/worldwide/product/proddetail.html?prodkey=ASC-29160">Adaptec 29160 Ultra160 SCSI Controller</a></font>
    <font size=1><a href="http://www.seagate.com/cda/products/discsales/marketing/detail/0,1081,321,00.html">Seagate ST373405LW 73GB U160 SCSI</a></font>
    <font size=1>Enermax EG465P-VE 450watt PSU</font>
    <font size=1>CPU Temp (100%): 39 C; HDD Temp (100%): 31 C (100%); Chipset Temp (100%): 32 C</font>

  8. #8
    Join Date
    Aug 2002
    Location
    Santa Cruz, CA
    Posts
    232

    Default

    here's a good place to buy them cheap

    http://www.compgeeks.com/products.asp?cat=CBL
    <table width=\"500\" height=\"140\" border=\"0\" cellpadding=\"0\" cellspacing=\"0\"><tr><td width=\"163\" bgcolor=\"#FFFFFF\"><font face=\"Verdana, sans-serif\" size=\"1\">&lt;strong&gt;:: Tim''s Rig ::&lt;/strong&gt;</font></td>
    <td width=\"163\" bgcolor=\"#FFFFFF\"><img src=\"http://www.bluespherestudios.com/images/spacer.gif\" width=\"163\" height=\"25\"></td>
    <td width=\"23\" bgcolor=\"#FFFFFF\"><img src=\"http://www.bluespherestudios.com/images/spacer.gif\" width=\"23\" height=\"25\"></td><td width=\"151\" background=\"http://www.bluespherestudios.com/images/case1.gif\" align=\"center\"><font face=\"Verdana, sans-serif\" size=\"1\">Chieftec Blue Case</font></td>
    </tr><tr><td bgcolor=\"#f3f3f4\"><font face=\"Verdana, sans-serif\" size=\"1\">Asus A7V333
    Athlon XP2500+

    Thermaltake Volcano 7+
    PC 2700 DDR@1 GB

    MSI G4 Ti4200 TP64
    Detonator Drivers 53.03
    </font></td><td bgcolor=\"#f3f3f4\"><font face=\"Verdana, sans-serif\" size=\"1\">Seagate 60GB 7200rpm

    Seagate 80GB 7200rpm

    Optorite 4x DVD+/-RW

    Sony 16x DVD

    Sony Floppy!

    Fans@2 intake, 3 exhaust</font></td><td bgcolor=\"#f3f3f4\"><img src=\"http://www.bluespherestudios.com/images/case4.gif\" width=\"23\" height=\"82\"></td><td><img src=\"http://www.bluespherestudios.com/images/case2.gif\" width=\"150\" height=\"82\"></td></tr>
    <tr><td bgcolor=\"#FFFFFF\"><img src=\"http://www.bluespherestudios.com/images/spacer.gif\" width=\"163\" height=\"25\"></td><td bgcolor=\"#FFFFFF\" align=\"right\"><a href=\"http://www.bluespherestudios.com\"><img src=\"http://www.bluespherestudios.com/images/bsslogo.gif\" width=\"115\" height=\"19\" border=\"0\"></a></td>
    <td bgcolor=\"#FFFFFF\"><img src=\"http://www.bluespherestudios.com/images/spacer.gif\" width=\"23\" height=\"33\"></td><td><img src=\"http://www.bluespherestudios.com/images/case3.gif\" width=\"151\" height=\"33\"></td>
    </tr></table>

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •