Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 9 of 9

Thread: codecreatures too taxing?




  1. #1
    Join Date
    May 2002
    Posts
    852

    Default

    hi all, i just thought i'd share with u something i find quite strange. my ti4600 is rock stable at 320/745...i've looped 3dmark2001 overnite....but when running codecreatures, i crash within a few seconds unless i lower my ram speed to 735...this is quite strange...i know codecreatures is more taxing but it shouldn't make such a huge difference in stability if any...any comments?:cheers:
    Epox 8RDA+
    xp2100@ 2.46ghz (214x11.5)
    Radeon 9700 pro
    512mb corsair xms3200 5-3-2-2@214
    512k ADSL
    SLK-800 HSF
    SB Audigy + Ultrasone HFI650DVD
    modded case: 2x120mm,4x80mm
    40GB Seagate Barracuda 4
    Sony trinitron 17"
    Antec Trupower 380W
    3D mark2003 : 5050

  2. #2
    Join Date
    Jun 2002
    Posts
    13

    Default

    Codecreatures is alot more stressing then 3DMark! And maybe ur temp was too high after looping if u didn't turn it off?!?! Where did u get the benchmark from? Their website doesn't have it anymore?

  3. #3
    Join Date
    May 2002
    Posts
    852

    Default

    i got it from guru3d.com
    yea but it's wierd cos i can loop 3dmark 2001overnite with my ram at 745 but codecreatures crashes after like 5 seconds
    :cheers:
    Epox 8RDA+
    xp2100@ 2.46ghz (214x11.5)
    Radeon 9700 pro
    512mb corsair xms3200 5-3-2-2@214
    512k ADSL
    SLK-800 HSF
    SB Audigy + Ultrasone HFI650DVD
    modded case: 2x120mm,4x80mm
    40GB Seagate Barracuda 4
    Sony trinitron 17"
    Antec Trupower 380W
    3D mark2003 : 5050

  4. #4
    Join Date
    Nov 2001
    Posts
    193

    Default

    I'd be interested in what you got for your Ti4600.

    My GF3 Ti200 at 200/460 gets 11FPS on avg at 1024x768. I can't run default series of benches cos my monitor doesn't support 1600x1200.
    Onyx

    TweakTown
    OCAU - Overclockers Australia
    CPF - CandlePower Forums

    Antec 1080AMG with 430W TruePower

  5. #5
    Join Date
    May 2002
    Posts
    852

    Default

    well with my cpu @1.7ghz 148 fsb with my ti4600 at 320/735using 29.42 drivers i get 29.2 fps at 1024x768...as u can tell...the dual pixle shaders on the geforce4 make a lot of difference if the software supports it....
    :cheers:
    Epox 8RDA+
    xp2100@ 2.46ghz (214x11.5)
    Radeon 9700 pro
    512mb corsair xms3200 5-3-2-2@214
    512k ADSL
    SLK-800 HSF
    SB Audigy + Ultrasone HFI650DVD
    modded case: 2x120mm,4x80mm
    40GB Seagate Barracuda 4
    Sony trinitron 17"
    Antec Trupower 380W
    3D mark2003 : 5050

  6. #6
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    Codecreatures was designed to fully stress video cards (much more so than 3DMark) and if you have the card overclocked to within an inch of its life then Codecreatures will easily tip it into a lockup. :smokin:
    <center>:cheers:</center>

  7. #7
    Join Date
    May 2002
    Posts
    852

    Default

    yea i see:afro:
    Epox 8RDA+
    xp2100@ 2.46ghz (214x11.5)
    Radeon 9700 pro
    512mb corsair xms3200 5-3-2-2@214
    512k ADSL
    SLK-800 HSF
    SB Audigy + Ultrasone HFI650DVD
    modded case: 2x120mm,4x80mm
    40GB Seagate Barracuda 4
    Sony trinitron 17"
    Antec Trupower 380W
    3D mark2003 : 5050

  8. #8
    Join Date
    Jun 2002
    Posts
    13

    Default

    With my Ti4200 and AXP 1800+ all at default, i get bout 23fps @ 1024x768

  9. #9
    Join Date
    May 2002
    Posts
    852

    Default

    yea GF4's are severely bottlenacked by cpu's rite now
    Epox 8RDA+
    xp2100@ 2.46ghz (214x11.5)
    Radeon 9700 pro
    512mb corsair xms3200 5-3-2-2@214
    512k ADSL
    SLK-800 HSF
    SB Audigy + Ultrasone HFI650DVD
    modded case: 2x120mm,4x80mm
    40GB Seagate Barracuda 4
    Sony trinitron 17"
    Antec Trupower 380W
    3D mark2003 : 5050

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •